Seibon® - OE-Style Matte Dry Carbon Fiber Trunk Lid without Spoiler Holes

Seibon creates performance oriented carbon fiber body panels that save weight, add style and are durable enough to hold up under grueling racing conditions. The production team at Seibon has over 15 years' experience, and they use the latest cutting-edge technology to manufacture carbon fiber panels.

Construction starts with the highest grade carbon fiber raw material, the same kind used in aviation, satellites and rockets. All Seibon panels are made with 1-piece carbon sheet, so appearance and strength are not impaired by the broken lines and patterns characteristic of multiple sheets put together.

The dry construction process involves pre-impregnating the carbon fiber with resin, which is why this type of carbon fiber is also called "pre-preg" carbon fiber. This method enables precise control of the amount of resin in the carbon fiber. Only enough resin is used as is necessary to form the part, which is why it can be made so light. Finally, the carbon fiber is molded and cured to produce the component. The end result is a strong, durable, attractive panel that will look great on your car and weigh up to 70% less than the original panel.

Once created, all Seibon carbon fiber components are meticulously inspected for quality and to ensure fitment. However, the buyer should understand that no aftermarket body part will fit exactly like the original equipment part. Some products may require minor modifications, and minor adjustments may be necessary as part of the normal installation process. Seibon recommends professional installation by an installer familiar with the installation of aftermarket carbon fiber components. If parts are to be painted they should be pre-fit to the vehicle before painting because painted products cannot be returned.

To prevent damage to carbon fiber hoods and trunks/hatches, Seibon recommends that the stock springs or shocks/dampers/struts not be reinstalled. Seibon also recommends that hood pins be installed for safety when installing a carbon fiber hood.

Seibon will replace any carbon fiber component that exhibits heavy cloudiness under the clear coat or has a clear coat bubble larger than 3/8". They will also replace any panel where the clear coat changes more than a full shade within 6 months. Slight fading and discoloration over time is natural. To preserve carbon fiber hood finish, Seibon recommends that the heat shield from the original hood be transferred to the carbon fiber panel, or that an aftermarket heat shield product be installed.