Vehicle Fitment
- Fits Models with 330mm (13") x 20.5mm (0.81") Brake Rotors.
Combination Passenger Side Parking Brake Caliper (120-10113-6-BK) by Wilwood®. Wilwood's Combination Parking Brake (CPB) Hydra-Mechanical Caliper uses hydraulic pressure for stopping and a mechanical locking mechanism for a parking brake. This redesigned unit provides new options for drum brake conversions and disc upgrades on rear axles that are not conducive to internal shoe systems. This caliper, when matched with the correctly proportionate rotor diameter, provides balanced bias and brake performance for use in conjunction with front wheel brake upgrades.
Caliper Material: Aluminum/Steel |
Caliper Color: Black |
Caliper Construction: Floating |
Caliper Mount Side: Passenger Side |
Caliper Type: Combination P-Brake (CPB) |
Driving Style: Performance / Racing |
Mount Type: Radial |
Pad Area: 4 in² |
Pad Plate: D340 |
Caliper Total Piston Area: 2.06 in² |
Piston Material: Steel |
Piston Quantity: 1-Piston |
Piston Size: 1.62" |
Brake Pad Volume: 1.5 in³ |
Maximum Rotor Width: 0.81" |
Maximum Rotor Diameter: 13" |
Minimum Rotor Diameter: 11" |
The CPB is a single piston floating design that attaches to a fixed radial mount bracket. The floating mount allows the caliper to maintain perfect alignment when the cable actuated mechanical parking brake lock is engaged and then released. The floating mount also keeps the caliper in correct alignment over the disc and prevents excessive pad knock-back on c-clip rear axles with measurable side play. As the pads wear, the caliper remains centered over the disc. Radial mounting provides nearly unlimited attachment options. Axle flange brackets can be configured to mount the caliper at any height within the compatible rotor diameter range, or lateral position relative the hat and rotor offset. The caliper is compatible with rotor diameters from 11.00" to 13.00" and is available in two models for either .81" or 1.00" width discs.
The parking brake lock is cable actuated. Connections are made with common cable ends that use a 1/2” cable housing end on the stop bracket, and a 1/8" to 9/64" cable with a crimped or welded ball end. The caliper will accept the OE cable on some vehicles. For other vehicles, new cable ends can be ordered to adapt the caliper to the vehicle's original cable system. For custom installations, aftermarket hand brake kit suppliers can easily configure the cable with the correct attachment end.
Wilwood® Engineering designs and manufactures high-performance disc brake systems. Since founding in 1977, Wilwood has developed a substantial matrix of brake components and engineering techniques that allow us to quickly and reliably create brake systems for almost any application. Their core ability is the rapid development of custom engineered brake systems using a combination of off-the-shelf and custom components. In addition to designing and manufacturing brakes for all types of competitive motor sports, Wilwood also manufactures brake systems and components for agricultural equipment, industrial applications, utility vehicles, snowmobiles, quads, motorcycles and military vehicles.