Name: USA Standard Gear® ZK C9.25-R - Rear Master Overhaul Bearing Kit
Brand: USA Standard Gear
SKU: mpn4632472611
Price: 203.49 USD
Availability: OutOfStock

Vehicle Fitment

Make	Model	Year
Chrysler	Imperial	1974-1975, 1981
Chrysler	New Yorker	1970-1982
Dodge	B-Series	1971-1998
	Challenger	1973-1974
	Charger	1968-1978
	Dakota	1997-2000
	Diplomat	1977-1989
	Durango	1999-2000
	DW Pickup	1967-1993
	Monaco	1966-1978
	Polara	1973
	Power Wagon	1969-1974
	Ram	1994-2000
	Ram Van	1999-2000
	Ramcharger	1974-1993
Plymouth	Fury	1971-1978
	GTX	1967-1971
	Roadrunner	1973-1975

Product Details

Rear Master Overhaul Bearing Kit (ZK C9.25-R) by USA Standard Gear®. USA Standard Master Overhaul kits let you finish your install with confidence. This kit uses Koyo bearings and races. When it comes to a top-notch replacement for your worn out factory part, this OE-quality differential component is right what the doctor ordered if you need to restore and maintain your vehicle running in its finest condition. Designed to fit and function the same as OE, this reliable part will direct torque to the drive wheels and make them rotate at the different speeds as they should, making cornering smooth and easy again.

Includes

Carrier Bearings and Races
Pinion Bearings and Races
Pinion Seal
Complete Shim Kit
Ring Gear Bolts
Pinion Nut
Crush Sleeve
Thread Locker
Marking Compound with Brush and Gasket

Features

Uses Koyo bearings and races
Expertly crafted from premium materials
Designed to match rigorous quality standards
High quality at a budget-friendly price

USA Standard Gear is here with excellent products that are available at a competitive price. The company does its utmost to provide the best possible solutions for your needs. All products by USA Standard Gear are made with expert care and created by professionals to meet all your requirements. The company does not accept compromises when it is going about quality, so you can be sure that all products have only first-rate quality. With many years of manufacturing experience, USA Standard Gear is the name you can trust.

USA Standard Gear®, a leading manufacturer of automotive parts, sets the standard for driving confidence. The company uses innovative technologies to provide premium quality dropouts, spools, gear sets, etc. It is known for the Spartan Locker that features a revolutionary design which makes installation and removal easier than any other designs. USA Standard also offers strong axles for front and rear of the vehicle as well as tough ring and pinion sets.

Brand:

USA Standard Gear

Part Number:

ZK C9.25-R

UPC:

883584370024

Alternate MPN:

ZKC925R

Warranty

Limited Warranty

USA Standard Gear® (“USA Standard”) warrants the original retail purchaser that all USA Standard products will be free from defects in materials and workmanship for the periods shown herein. USA Standard makes no other warranty of any kind, express or implied. All other warranties, including but not limited to an implied warranty of merchantability or fitness for a particular purpose, are excluded. This warranty is offered provided that the USA Standard product has been installed and maintained in accordance with USA Standard instructions, and that it has not been subject to modification, accident, abnormal use, or misuse. At USA Standard’s discretion, this warranty may be voided if installation of USA Standard product(s) occurs on vehicles with tires that exceed USA Standard Maximum Recommended Tire Size.

Upon notification of a warranty claim, USA Standard shall investigate the claim of defect, and, in the event of a verified defect, shall, at their sole choice, either repair the defective product or replace it.

This warranty does not cover, and USA Standard shall not be liable for incidental or consequential damages, including loss of time, inconvenience, loss of vehicle use, or loss or damage to personal property (including loss or damage to vehicle parts due to the failure of the USA Standard product). Also, this warranty does not cover damage to the axle caused by or facilitated by failure of a non-USA Standard component.

This agreement offers you specific legal rights. You may also have other rights which vary from state to state.

USA Standard Gear® Warranty by product

Spool

The warranty lasts as long as the original purchaser owns the vehicle in which the spool is originally installed.
It is normal for spools to cause tire chatter, squeal, or scrubbing when the vehicle is not moving in a straight line. Both rear tires must measure the same height from ground to top of wheel for the spool to function properly without premature wear.

Rear axle (1040/1050)

USA Standard Gear covers parts for five years against manufacturing defects.

Front axle (Series ZA W)

Warrantied against manufacturing defects and axle breakage for five years. This warranty is not transferable to another party. “No Questions Asked” replacement for first warranty return, however, USA Standard Gear reserves the right to either replace axle or refund the original purchase price after the first warranty claim. USA Standard Gear (through RANDYS Worldwide Automotive) makes final determination on warranty considerations.

Ring and pinion gear set

Warrantied against manufacturing defects for one (1) year.

Positraction differential

Warrantied against manufacturing defects for one (1) year.
Exclusions apply, but the warranty does not cover premature clutch wear or abuse. It is normal for positraction differentials to cause tire chatter, squeal, or scrubbing when a vehicle is not moving in a straight line. Rear tires must measure the same height from ground to top of wheel for differential to function properly without premature wear. Limited slip additive or appropriate friction modifier must be used with oil to reduce positraction chatter.

Spartan locker

Warrantied against manufacturing defects for one (1) year.

Install kits

Includes ZBK, ZPK, and ZK. USA Standard Gear covers parts for one year against manufacturing defects.

Spider gear kits (ZIK)

One year against manufacturing defects. Exclusions apply, but the warranty does not cover clutch wear in limited slip differentials.

Manual Transmission Bearing Kits

1-year warranty against manufacturing defects.

Main Shaft Snap Rings

2-year warranty against manufacturing defects.

Magnuson-Moss Warranty Act:

Legally, a vehicle manufacturer cannot void the warranty on a vehicle due to an aftermarket part unless they can prove that the aftermarket part caused or contributed to the failure in the vehicle (per the Magnuson Moss Warranty Act (15 U.S.C. 2302(C)) Learn More

Reviews

(0)

Only authorized customers can leave a review on our website. We would love to know what you like or dislike about the product. Share your opinion on product quality, appearance, installation, and other characteristics.

USA Standard Gear® ZK C9.25-R - Rear Master Overhaul Bearing Kit

Questions and Answers

(0)

If you have any questions about this product, please don't hesitate to ask us. We will be happy to help you!