XB Evo™ Projector LED Fog Lights by Morimoto®. 1 Pair. Black housing, clear lens. Round. The new Morimoto XB LED projector fog lights look great and perform like champs. Their aim can also be adjusted just like factory with the integrated assembly that's cast into their shell. Designed to fit modern vehicles, the complete housings will mount behind the bumper and fit all factory mounting points. The lights have a virtually infinite lifespan and an unbeatable warranty.
Specifications
| Input: H11/H9/H8 Male |
| White LED Chips: Osram Oslon Compact PL KW CWLPM3.T1 |
| Peak Luminosity (lm; raw): 1,500lm (White) |
| Power: 20.5W (each) |
| Intensity (White): 8,500Cd |
| Compliance: SAE J583 F3 / ECE R19 |
| Optic: Ishida SAE Wide Fog |
| Horizontal Beam Spread: H 45L to 45R (90 degrees) |
| Vertical Beam Spread: 1D to 7.3D (6.3 degrees) |
| Interior Color: Gloss Black with contrasting textures |
| Material: Die Cast Aluminum (Housing), UV-Resistant Polycarbonate (Lens) |
| Lens Coating: Proprietary Hardened Anti-UV Protection |
Includes
- (2) Fog Lights
- 8x 10mm Mounting Bolts
- (2) H11/H9/H8 Connectors
Features
Ultra-bright LEDs to maximize safety in hard-to-see conditions
Modern LEDs produce a pure light beam with ideal contrast for all-weather visibility and vehicle styling
Projector-based optics project the light precisely where you need it
Precision projector optic lenses produce a super wide, concentrated beam of light to cut through dense fog, rain to improve your visibility without creating glare
Precisely built for direct-fit replacement of your factory fog lights
Direct-fit housings are an easy upgrade in place of original equipment housings and require no modification to install
Designed to offer simple, hassle-free Plug-and-Play installation
As easy as plug into your stock connectors, so you can get dramatically enhanced illumination without complicated wiring
Tough, impact-resistant polycarbonate lenses ready for just about anything
Virtually unbreakable polycarbonate lenses are designed to keep the housings in tip-top shape and looking great for hundreds of miles to come
IP67-rated housings for waterproof protection and durability
Sleek, lightweight and durable powderoated cast aluminum housings with heat sink design meet or exceed the IP67 standard of weather resistance
Can pass DOT and SAE vehicle inspections
These fog lights are designed to meet and exceed all DOT and SAE regulations
If you don't have LED-powered fog lights, then you're just behind the times. Install a set of state-of-the-art round LED projector fog lights from Morimoto featuring the latest in ultra-bright, modern LED technology paired with precision projector optic lenses delivering perfect optical clarity to maximize potential output and driving safety in poor visibility conditions. Stunning in looks and performance, these fog lights create a powerful beam of light that goes under that hazy fog or dust cloud, rain wall, or anything in between, vibrantly illuminating the pathway close to the ground so you can blaze your way through the most inclement weather and dissipate the gloom of the night without glaring other motorists.
Premium-grade Morimoto LED projector fog lights are designed for a perfect fit and hassle-free mounting without any modification. These complete fog light housings will swap directly in place of the original halogen units that they're designed to replace, using all of the stock mounting locations. Their aim can be perfectly dialed in with the integrated height adjusters. Wiring is easy too. The XB LED Fogs are designed to work without any special wiring. They will plug into the factory connectors for the stock fog lights and each assembly includes all necessary connectors, rubber seals, and pigtails for a plug-n-play install.
Powered by three high-power LEDs, these LED projector fog lights provide an impressive light output, brightness and efficiency. The projector-based optics concentrate the pure white light into a beam that's super wide and perfectly distributed for use as a fog light. Make no mistake, these lights will produce a much better result than slapping some LED replacement bulbs into your stock housings. The Morimoto fog lamps meet and exceed all SAE, DOT, and ECE regulations. The LED fog lights are well built, look great and ready for just about anything the road can throw at you. Their durable polycarbonate lens will resist the test of time, keeping the housings looking new for many years to come. The powdercoated cast aluminum housing is lightweight and much stronger than plastic alternatives. Doubling as the heat sink for the LEDs, the housings completely protect the internals from moisture and road debris.
Morimoto® was established in 2008 in the USA to fill the gap in the aftermarket for truly high-quality automotive lighting products. Since that time, the company has grown to become one of the most renowned manufacturers of high-intensity lighting solutions that improve both the aesthetic appearance and real performance of your vehicle. The existing Morimoto product line is hard to beat! The company offers superior-grade HID systems, HID bulbs and ballasts, LED bulbs, LED head and tail light assemblies, and many other products made using cutting-edge technology to be superior to the competition in every way. Whether you’re driving a high-performance street car, off-road truck, public safety or commercial vehicle, Morimoto can meet the specific needs of any application in terms of light output, color, form, function, and efficiency.