Supreme™ Front Driver Side Lower Non-Adjustable Control Arm and Ball Joint Assembly (CMS20329) by Mevotech®. Quantity: 1 per Pack. Superseded. The primary function of a control arm is to provide the connection point between the body of the vehicle and wheel. This allows the wheel to move up and down while the body frame and passengers stay smooth and level.
Faster installation: Save time with additional ball joint pre-assembled to provide a complete solution
Superior toughness: Get longer-lasting performance from sintered bearings
Quick and easy installation: Simply secure ball joint to the vehicle with part specific castle nut & cotter pin provided
Simple to service: Make servicing a snap with the 180 degree SAE grease fitting included
Optimal performance: Meet or exceed OE specifications with stamped steel construction
Resists corrosion: Prevent rust build up and increase longevity with protective surface treatment
Mevotech is a unique, progressive company that has been moving business for decades, providing aftermarket parts that outlast and outperform the competition. It is most important to have superior vehicle control while driving because if not, you may end up having an accident. A control arm is vital part in your vehicle's suspension system: it allows your front wheels to turn and change direction. It joins the wheel to your car's frame and enables it to move independently. Basically, the control arm acts as a 'link' between the frame and the wheels.
Mevotech OE replacement control arms are designed to fit and function just like the OE parts and give stability and alignment to the vehicle, ensuring safety and comfort. The Mevotech control arms are unique in their own way: they are redesigned to improve their life and durability, helping to restore the vehicle's original suspension specifications. Mevotech control arms are highly durable even in the most extreme conditions. They are built with thicker forgings to reduce excessive flexing and twisting of the suspension system. Finally, the control arms are designed to incorporate seamlessly into your application, providing a perfect fit after installation.
Mevotech® has been revolutionizing the automotive aftermarket for over thirty years. Since 1982 Mevotech has been learning and innovating to ensure that Mevotech creating top quality, technologically advanced automotive parts while delivering the best customer service and support in the industry.
Only authorized customers can leave a review on our website. We would love to know what you like or dislike about the product. Share your opinion on product quality, appearance, installation, and other characteristics.
Mevotech® CMS20329 - Supreme™ Front Driver Side Lower Non-Adjustable Control Arm and Ball Joint Assembly
/5
1-10 of 11 Reviews
5 of 5
Works Well
Mevotech® - Supreme™ Front Upper Non-Adjustable Forged Control Arm and Ball Joint Assembly
with Rough country 2inch level coils and shocks for 2wd and thinner tires it’s way tighter
Posted by Mohamed (Detroit, MI) / August 07, 20232012 Ram 1500
1 of 5
Bushing Blow Out
Mevotech® - Supreme™ Front Lower Non-Adjustable Control Arm and Ball Joint Assembly
Bushing blow out under a year don’t bother buying. Pay cheap you get cheap. If you do get I recommend you check them at 6 months before warranty expires. I would recommend not to buy. Customer service doesn’t go above for the customer, they don’t care.
Posted by Diego (Mira Loma, CA) / September 06, 20222017 Mazda 3
Installed all new Mevotech parts, upper and lower control arms, less than 6 months and the control arm bushings are worn out and need to be replaced at a cost of $ 687.17. I just drive around the city, no off road or crazy driving, this is poor quality stuff.
Posted by Donald (Scottsdale, AZ) / March 16, 20212012 Ram 2500
5 of 5
Why Pay More?
Mevotech® - Supreme™ Front Control Arm and Ball Joint Assembly
I have a 2007 Ford Ranger 2WD Coil Front Suspension with broken ball joints. I picked up a pair of this and the other control arm for the other side (2 different part numbers) from this site (they have the best price, better than RockAuto and Amazon). These are Mevotech Supreme Control arms with grease fitted ball joints (trust me, these will last so much longer than the sealed cheapy units). Everything about these control arms is heavy duty. The steel is beefier than stock Ford control arms and so are the bushings on the ends (much bigger than stock). Just for the record, Mevotech does not make a more heavier duty control arm for this truck than the Supreme. Its just as heavy duty and as strong as the MOOG heavy duty control arms, but at a much more affordable price. After a pretty easy installation of the arms (the lower ball joint is no joke, be prepared to use plenty of profanity and rent a ball joint press tool from Autozone). These control arms only took me an hour each......they were a joy to work with. Sniff....sniff....it was just a beautiful thing.....but I digress. After everything is tightened down to specs, I drove my Ranger out and noticed something right away. Whenever I started the truck, I could always feel the engine vibration on the steering wheel. I just believed this was normal. Now I feel absolutely nothing from the steering wheel......even over bumpy roads and pot holes. You really begin to realize the abuse these ball joints and control arm bushings have to endure so you can have a smooth, quiet, controlled ride. Save your money and don't buy those expensive Motorcraft stock OEM control arms. These Mevotech will last you far beyond this lifetime. Before I forget, special thanks to CARiD for the free fast shipping (got them in two days......look out Amazon!) Happy wrenching eveyone!
Posted by Customer / September 05, 20202007 Ford Ranger
5 of 5
A Good Buy
Mevotech® CMS101462 - Supreme™ Front Passenger Side Lower Non-Adjustable Control Arm and Ball Joint Assembly
Great service and good prices. I will buy again. Thank!
Posted by Volodymyr (New Castle, DE) / June 03, 20202015 Fiat 500
Factory units should be made like these units. Heavier grade ball joint and bushings don’t cost much more and you get more control. It’s a no brainer if the OEM was made stronger they would last longer and most people would have a better handling vehicle.
Posted by Richard (New Windsor, NY) / January 24, 20192008 Chevy Trailblazer
5 of 5
The Best Control Arms for N-body Grand Am
It looks amazing feels amazing. It was very easy to install and at 1st I was sent the wrong size but CARiD showed me that it isn't about making money, CARiD is about making u happy rite away, they switched it out for the proper size for free and rite away =-). I can tell it's going to last a very long time =-)
Posted by Mikey (Biddeford, ME) / October 28, 20182004 Pontiac Grand Am