Vehicle Fitment
| Make | Model | Year |
|---|---|---|
| Chevy | SSR | 2003-2006 |
Product Details
Heavy Metal Catalytic Converter (93380) by MagnaFlow®. Converter Configuration: Direct Fit. With Gaskets. Without Air Tube. Catalytic Inlet Diameter: 2.5". Catalytic Outlet Diameter: 2.5". Catalytic Converter Overall Length: 39.5". If your car needs replacement, install one that will get you through the smog check. This converter will directly replace the factory unit, with little or no fabrication required.
Notes
- Uses Factory Hangers
- Always consult emissions regulations before replacing a Catalytic Converter
- This is a Federal (EPA) compliant part, legal for use on vehicles built to meet Federal EPA standards ONLY. It is NOT legal for installation on vehicles required to meet CARB standards and/or registered in California and other states following CARB standards, including NY, ME & CO
Specifications
| Catalytic Series: Heavy Metal |
| Converter Configuration: Direct Fit |
| Converter Body Material: Stainless Steel |
| Catalytic Converter Substrate Material: Ceramic |
| Inlet Connection Type: Bolt-On |
| Catalytic Inlet Diameter: 2.5" |
| Catalytic Outlet Diameter: 2.5" |
| Catalytic Converter Width: 19" |
| Main Piping Diameter: 2.5" |
| Catalytic Converter Overall Length: 39.5" |
| Air Tube: No |
| Catalytic Converter Format: Pre-Catalytic Converter and Main Catalytic Converter |
| Installation Complexity: Bolt-on. Do it Yourself |
| Converter Quantity: 2 |
Includes
- Catalytic Converter
- Band Clamp (1)
- Gasket (2)
Features
- Reduces harmful emissions
- Exact replacement with little or no fabrication or modifications required
- Ribbed body to minimize expansion and distortion, holding the ceramic catalyst in proper alignment
- Strongest and smoothest flowing inlet and outlet joint of any manufacturer
- Each inlet tailored to the size of the converter body
- Converter body manufactured from heavy-duty stainless steel
- Seam welded for a strong, tight bond
- On vehicles registered outside California, the converter is warranted against construction defects for 5 years and against emissions failure for 25,000 miles
- On vehicles registered within California, the converter is warranted against construction or emissions check failure for 5 years or 50,000 miles
- Proudly made in the USA
The Direct Fit Catalytic Converter is an exact replacement for your stock converter, with an interface at either end that will allow it to be bolted into the exhaust system. No fabrication or modifications are usually required. It’s available in OBD II (On-Board Diagnostics, 2nd Generation), Pre-OBD II, and OEM Grade OBD II configurations. Pre-OBD II is for early vehicles (generally 1995 or older), which were equipped with 2-way, 3-way, or 3-way with air injection converters. Two-way converters oxidize harmful Hydrocarbons (HC) and Carbon Monoxide (CO) along with secondary oxygen into water (H2O) and Carbon Dioxide (CO2). Along with the previously detailed conversion, a 3-way converter also reduces oxides of nitrogen (NOx) into Nitrogen (N2). The 3-way with air injection converter operates the same as a 3-way converter but with the addition of air pumped into the converter to improve the oxidation capabilities.
OBD II converters are for 1995 and newer vehicles and are 3-way converters. OEM Grade OBD II converters are for vehicles registered outside of the state of California, with California spec emissions. More precious metals are applied to the substrate on these converters to further reduce emissions. To determine if this converter is right for your vehicle, find the VECI (Vehicle Emissions Control Information) label in the engine compartment and look for the word “California” on the label.
On vehicles registered outside the state of California, MagnaFlow warrants the Direct Fit Catalytic Converter to be free of manufacturer’s defects for a period of 5 years and emissions failure for 25,000 miles. Direct Fit Catalytic Converters on vehicles registered in California carry a 5 year, 50,000 mile warranty against manufacturer’s defects and emissions failure.
MagnaFlow® has been in business for more than 30 years, with its slogan "Quality – Power – Sound" leading the company on its steady path to success. MagnaFlow is the market leader in exhaust systems. No other brand has managed to fulfill the demands auto enthusiasts have on their exhaust systems, while still complying with emission standards, as MagnaFlow has. The product line is steadily expanding, introducing new, cutting edge technologies and designs. MagnaFlow is the leader in exhaust system design and the company is determined to stay in the lead.
Reviews
(9)Only authorized customers can leave a review on our website. We would love to know what you like or dislike about the product. Share your opinion on product quality, appearance, installation, and other characteristics.
1-9 of 9 Reviews
Good Part, Fitment Is Off.
MagnaFlow® - Heavy Metal Direct Fit Catalytic ConverterPosted by Benjamin (Tulsa, OK) / September 30, 20222007 Toyota Camry
Fit perfectly, Works fine.
MagnaFlow® - Heavy Metal Direct Fit Catalytic ConverterPosted by David (Fallon, NV) / March 23, 20202003 Toyota MR2
Didn't Fit
MagnaFlow® 5581935 - OBDII Direct Fit Catalytic ConverterPosted by John (Roseville, CA) / August 09, 20192007 Toyota Tundra
Good Quality
MagnaFlow® - Direct Fit Catalytic ConverterPosted by John F (San Jose, CA) / May 25, 20191998 Ford Contour
MagnaFlow for 1993 Ford F150 4.9l Engine
MagnaFlow® - Pre-OBDII Direct Fit Catalytic ConverterPosted by Michael Alan (Felton, DE) / November 27, 20181993 Ford F-150
Poor Fit!
Posted by Amit (Walnut Creek, CA) / May 08, 20181989 Toyota Celica
Awesome
Posted by Zacheus (Placerville, CA) / April 11, 20181990 Acura Integra
Good
Posted by Walter (Gary, IN) / May 18, 20171998 Chevy Tahoe
Posted by Arnold (Belmont, ME) / March 10, 20172000 Chevy S-10 Pickup
Questions and Answers
(0)If you have any questions about this product, please don't hesitate to ask us. We will be happy to help you!