Vehicle Fitment
| Make | Model | Year |
|---|---|---|
| BMW | 3-Series | 2004-2006 |
| 5-Series | 2004-2005 | |
| X3 | 2004-2006 | |
| X5 | 2004-2006 | |
| Z4 | 2003-2005 |
Product Details
Dual Mass Flywheel by LuK®. LuK dual mass flywheels absorb engine vibrations before they are transmitted to the driveline where they can create gear rattle. These units feature a built-in damper designed to isolate engine torque spikes and prevent transmission damage. By design, dual mass flywheels cannot be resurfaced.
Specifications
| Ring Gear Mounting O.D.: 10.4331 inch |
| Ring Gear Mounting O.D.: 265 mm |
| Ring Gear Thickness: 0.3622 inch |
| Ring Gear Thickness: 9.2 mm |
| Crank To Friction Surface: 1.6811 inch |
| Crank To Friction Surface: 42.7 mm |
| Flywheel Thickness [mm]: 2.4882 inch |
| Flywheel Thickness [mm]: 63.2 mm |
| Dowel hole diameter: 0.3937 inch |
| Dowel hole diameter: 10 mm |
| Ring Gear Major Dia.: 11.2992 inch |
| Ring Gear Major Dia.: 287 mm |
| Bolt hole PCD crankshaft: 2.8346 inch |
| Bolt hole PCD crankshaft: 72 mm |
| Bolt hole PCD clutch pres.plte: 10.2362 inch |
| Bolt hole PCD clutch pres.plte: 260 mm |
| Flywheel Friction Surface Inner diameter: 5.9843 inch |
| Flywheel Friction Surface Inner diameter: 152 mm |
| Flywheel friction surface outer diameter: 9.4488 inch |
| Flywheel friction surface outer diameter: 240 mm |
| Number of teeth, starter ring gear: 113 |
| Torque Capacity DMFW: 13.6102 inch |
| Torque Capacity DMFW: 345.7 mm |
| Centering diameter / dowel hole: 10.2362 inch |
| Centering diameter / dowel hole: 260 mm |
| Ring Gear Number: L-09180-0135-00 |
| Cup depth, secondary flywheel: -0.3622 inch |
| Cup depth, secondary flywheel: -9.2 mm |
| Ring Gear To Friction Surface: 1.6142 inch |
| Ring Gear To Friction Surface: 41 mm |
| Dowel Hole Pattern: 5 |
| Crank Hole Dia.: 0.5039 inch |
| Crank Hole Dia.: 12.8 mm |
| Overall Casting O.D.: 11.4882 inch |
| Overall Casting O.D.: 291.8 mm |
| I.D. for Pilot: 1.4252 inch |
| I.D. for Pilot: 36.2 mm |
| Bolt Hole Pattern: 2 |
Features
- Engineered and manufactured to OE specifications
- All new components - including ring gear and dowel pins
- Perfectly balanced
- Precision-machined from premium grade cast iron
- Superior quality friction surface
- Excellent heat-absorbing capacity
- Order from the comfort of your home or office
- 8 mounting bores
- With pilot bearing
- No SVHC present
The flywheel is an integral part of a clutch replacement. In today’s tightly packaged clutch systems, flywheels can easily be machined beyond their usable life – a critical flaw that would not be evident until after the clutch is installed. Improper machining can also cause interference, no release and slipping problems. Pairing your LuK RepSet with a new LuK flywheel is a smart, cost-effective alternative to resurfacing.
LuK® is a leading manufacturer of the systems and components for vehicle's powertrains. It was the first company in Europe which engineered the diaphragm spring clutch with a release system which is now installed in every third new car. At present the company manufactures dampers, components for clutch systems, transmissions, as well as products for tractors. The newest innovative product developments of LuK are the automation of manual transmissions, torque converters, and components for CVT transmissions that could handle more than 300 Nm of torque.
Installation
Reviews
(0)Only authorized customers can leave a review on our website. We would love to know what you like or dislike about the product. Share your opinion on product quality, appearance, installation, and other characteristics.
Questions and Answers
(0)If you have any questions about this product, please don't hesitate to ask us. We will be happy to help you!