K&N® - 57 Series FIPK Generation II High-Density Polyethylene Black Cold Air Intake System with Red Filter and Intake Pipe and Heat Shield

35 reviews|Item # mpn4825780553|Similar Products
$349.99
In Stock (6) - Ships in 24 to 48 hrs
Vehicle Specific
  • Please Select Vehicle Below
Notes:
  • This is a CARB compliant part, legal for use on vehicles built to meet CARB standards and/or registered in California and other states which follow CARB standards (CARB EO: D-269-37).
Authorized Dealer
Have a Question? Ask a Specialist
888-577-6964Live Chat

Vehicle Fitment

MakeModelYear
FordRanger 2004-2008
MazdaB-Series 2004-2008

Product Details

57 Series FIPK Generation II High-Density Polyethylene Black Cold Air Intake System and Intake Pipe and Heat Shield (57-2560) by K&N®. This kit improves airflow into your engine. It includes a K&N air filter and a custom designed air intake tube. The K&N filter increases the airflow and the intake tube smoothes that airflow into the engine. The result is more horsepower and torque, and better acceleration you can feel.

Notes

  • This is a CARB compliant part, legal for use on vehicles built to meet CARB standards and/or registered in California and other states which follow CARB standards (CARB EO: D-269-37).

Specifications

HP Gain: Up to 10 hp
TQ Gain: Up to 10.7 lbs./ft.
Series: 57 Series FIPK Generation II
Filter Shape: Round
Filter Color: Red
Filter Height: 6.5"
Tube Finish: Black
System Type: Cold Air Intakes
Material: High-Density Polyethylene
Air Filter Material: Cotton Gauze
Replacement Filter: RX-4860
Filter Large End Diameter: 6"

Includes

  • Air Intake
  • 3 Stainless Steel Regular Clamps
  • 1 Coupler

Features

  • Guaranteed to increase horsepower
  • Designed to improve throttle response and engine sound
  • Lasts up to 100,000 miles before service is required (depending on driving conditions)
  • Replaces entire factory air intake system
  • Free-flowing high density polyethylene tube
  • Easy to install, usually in 90 minutes or less
  • Washable and reusable lifetime air filter
  • K&N Million Mile/10 Year Limited Warranty

The K&N 57 Series Generation II Air Intake Kit improves intake airflow from the air filter all the way to the throttle body. The system starts with the world famous K&N high flow air filter. K&N uses the largest conical shaped air filter that will fit in the engine compartment. The large increase in filter area over the stock airbox filter results in a huge increase in airflow and a greater capacity to capture and hold dirt.

The filter is attached to a precision molded intake tube that connects the filter to the throttle body. The tube is precisely designed to reduce turbulence and accelerate airflow into the engine. The rotationally molded intake tube is made from interlaced high density Polyethylene, reducing intake air temperature from similar metal tubes. Intake air temperature is further reduced by a heat shield that isolates the filter from the engine compartment. The reduction in air intake temperatures results in a cooler, denser air intake charge and even more horsepower.

K&N uses a dynamometer to design its air intake kits to make the most horsepower possible. But their power figures aren't based on just one vehicle, but rather an average of runs by a number of vehicles. This means repeatable numbers and horsepower claims you can count on.

Every 57 Series Generation II Air Intake Kit comes complete with everything necessary for installation, including comprehensive installation instructions. All adapters are manufactured from high quality materials such as steel, aluminum, silicon or reinforced nylon, to ensure long life. The K&N filter can go up to 100,000 miles before cleaning is required. And the K&N air filter is guaranteed for one million miles.

K&N® is the inventor and leading innovator of reusable cotton gauze filter technology for automotive applications. The first K&N filter was conceived for racing over 50 years ago and a performance enthusiast mindset continues today throughout all levels of the company. K&N is the sales and brand leader for performance filters, including an extensive line of factory replacement filters and performance air intake kits. The company actively promotes the environmental, economical and performance advantages of long-life reusable cotton gauze filters.

Brand:
Part Number:
57-2560
UPC:
024844109149
Alternate MPN:
572560

Reviews

(35)
Only authorized customers can leave a review on our website. We would love to know what you like or dislike about the product. Share your opinion on product quality, appearance, installation, and other characteristics.
K&N® - 57 Series FIPK Generation II High-Density Polyethylene Black Cold Air Intake System with Red Filter and Intake Pipe and Heat Shield
/5
1-10 of 35 Reviews
5 of 5
Easy To Install
This air intake was easy to install and had a noticeable improvement on my horsepower.
Posted by John (Calgary, AB) / October 01, 20152007 Ford Ranger
5 of 5
57 Series Generation Air Intake Kit (3.0)
The Intake system you sold me works great. It has given my truck more pep and when I push on the footfeed, I not only can feel more power, but I can here it as well. Now I need some tuned header's and some dual exhaust and I'll be set. But right now, I would like to have some Chrome bed rails. DannyTVick
Posted by Danny (Commerce, TX) / March 01, 20122004 Ford Ranger
Fits easily and sounds nice and loud in my 2003 ram 1500, only issue with this filter is that you have to drill a hole into the new filter tube for the o2 sensor. Other than that its very basic and easy to install
Posted by Kaiden (Zionsville, IN) / January 20, 20242003 Dodge Ram
I recently reviewed this and I’m not sure how to edit the other review I wrote. I have come back to say K and N and CARiD came through by getting me the missing parts to my kit. Everything works and runs great as it should and all is well. Thanks for reading. 2014 dodge Charger pursuit 5.7 Hemi with AWD aka Lucifer P.S. I know he needs a bath right now lol
Posted by Cameron (Oshkosh, WI) / January 24, 20232014 Dodge Charger
I own a 2014 Dodge Charger pursuit with a 5.7 Hemi and AWD. I bought this cold air intake kit part number 57 1542 because in the past I have very much enjoyed and appreciated products from K and N. I am a pretty firm believer in you get what you pay for. Which is why I was okay with the thought that I spent 400 US dollars on a cold air intake. I probably would not have been as disappointed if I would have caught that the kit was missing the two silicone hoses couplers part number 08630 that are 3 and a half inches ID and 2 inches in length when I was not already done installing EVERYTHING else on my vehicle. I guess that part is my fault for not paying attention and catching it sooner upon opening all the packaging. The point is this is still aggravating. As a customer who loves K and N because of great past experience with their products on many different vehicles I have always been able to appreciate the quality in their products as well as respect their higher pricing because of this. Therefore when I spend 400 US dollars on a cold air intake kit I expect the parts to all be present and in great shape. I will come back and edit and update if all ends well with customer service. I get it mistakes happen. It is a shame that I feel the need to say all this because of two what you would think would be simple or cheap parts. I checked around town at parts and hardware stores and nobody has 3 and a half ID silicone or rubber hosing. Mind you all I live in a decent size city. In conclusion keep in mind you may need to order your own hoses for this kit even though they are on the parts listed in multiple locations. I even went on k and n website directly and I tried searching for the part number 08630 and got nowhere. However I did find part number 08698 that appears by description to potentially be the same part. As long there is no special molding involved on the original part 08630. Hopefully KandN can fix this. Thanks for reading.
Posted by Cameron (Oshkosh, WI) / January 12, 20232012 Dodge Charger
If youre looking into this product this is the sign to get it, found this product for my Colorado since I'm in CA, there is more restrictions and less options to tune up this V6. I finally found this K&N air intake system for it. Super fast shipping, arrived in less than 2 days from placing order, I personally installed this product in less than 45mins. Ima be completely honest YOU CAN FEEL AND HEAR THE DIFFERENCE completely satisfied with this purchase and of course K&N products. Like I said in my review title I should have bought it sooner.
Posted by Gustavo (Los Angeles, CA) / February 17, 20222016 Chevy Colorado
Easy to install, only a small amount of post order fabrication, (had to drill into the bottom of the box to mount). Sounds great! Gives a throatier sound at certain RPM thresholds. Both the wife and I have noticed the difference. Looks sleek and subtle, not to annoyingly obvious for an aftermarket part. Would recommend.
Posted by Adam (Hope Mills, NC) / March 15, 20212008 GMC Yukon
Works good, easy to install.
Posted by Johnathan (Temple, TX) / March 08, 20212006 Dodge Durango
Just installed, first time took 2 hours. Sounds amazing!
Posted by Gage (Glenwood, IA) / February 27, 20212013 GMC Sierra 1500
Love it, I can really feel the difference!
Posted by Jose (New Haven, CT) / December 29, 20202006 Chrysler 300

Questions and Answers

(0)
If you have any questions about this product, please don't hesitate to ask us. We will be happy to help you!
CONTACTS
CUSTOMER SERVICE
INFORMATION
CARiD FacebookCARiD XCARiD YouTube ChannelCARiD PinterestCARiD Instagram
All manufacturer names, symbols, and descriptions, used in our images and text are used solely for identification purposes only. It is neither inferred nor implied that any item sold by CARiD.com is a product authorized by or in any way connected with any vehicle manufacturers displayed on this page.