All Extang covers are made in the USA, manufactured at our Ann Arbor, Michigan facility.
Extang supports all of our products, 100%, with the industrys strongest warranty: the Maximum Strength Warranty. In addition, a certified ISO9001:2008 facility for quality standards.
Installing a tonneau cover to your vehicle will help reduce aerodynamic drag and therefore improve MPG. Industry testing has shown gas mileage improvements of up to 10%.
The part number is typically 10-11 digits, stamped along the underside of the cover, typically located at the driver side cab corner. On hard covers please look for a white sticker to locate the UPC number.
Yes, Extang tonneau covers do not restrict the tailgate in any way.
Most Extang tonneaus sit about an inch above the rail.
Extang recommends that our vinyl tarps be cleaned with a mild soap, water and a medium bristle brush. If you choose to use a vinyl conditioner, be sure to use our TONNO TONIC. Many other vinyl conditioners contain chemicals that can actually damage your tarp. TONNO TONIC bonds molecular to your Extang Tonno to give it that brand new look day after day. TONNO TONIC will not attract dust nor will it coat or seal your cover. TONNO TONIC allows your tonno to breathe naturally, while enhancing the appearance and providing additional UV protection.
Yes, automatic car washes are safe, however you will not want to select any type of wax treatment as the ingredients within the wax treatment could potentially harm the finish built into the cover.
Extang recommend RaggTop made by Wolfsteins Pro Series to treat the Signature Series material.
Extang recommends that our hard folding covers be cleaned with soap, water and a medium bristle brush. You may use a product like Meguires Quick Detailer to protect and preserve the finish of your tonneau without streaking.
There aren't any tonneau covers on the market today that are 100% waterproof. Extang consider covers weather tight and use application specific rubber seals to create superior sealing against water and dust. Tonneaus are built to be weather tight against normal rain and car washing situations.
No, the average installation for a retail customer usually takes 30 to 40 minutes or less (professional installation will take 10-15 minutes). No drilling or tools are required except for an Allen wrench on some applications or a 1/2 inch socket wrench on Encore. Anything you will need to perform the installation is included in the box.
All Extang Tonno Covers are no damage systems. Most are attached to your truck bed with clamps. There are a very few however, that require what is called a wall plate. This wall plate uses a 3M adhesive tape. The wall plate attaches to the inside of the bed and then the top part of the clamp bolts onto the wall plate. If you have further questions contact Extangs Customer Service Department.
Both snap covers are designed to roll up quickly against the cab and be secured with strong, convenient straps to allow full access to the bed. Clicklock (Classic) and Leverlock (Blackmax) style corners allow you to attach or remove the tail rail instantly, without any tools. The Monster Bows are spring loaded and can be removed or installed easily with one hand.
Yes, the installation of a Blackmax or Classic Platinum will not interfere with your track system. The covers allow for full use of the system.
Yes, each cover has an exclusive patented all-climate engineered design to 4-way adjustable for cold weather. The Tuffklamps allow for two bow heights: HIGH for maximum water shedding in harsh weather and for improved gas mileage, and LOW for cold weather tonneau attachment. The MaxSnap slides have two settings: stud low for tight tarp fit in hot weather or stud high for looser tarp fit in cold weather.
Each cover is designed to work with many aftermarket truck accessories and will fit with all types of bedliners, most bedcaps and 5th wheel hitches.
To adjust the tension on each cover, you can adjust the bow height to the high setting on the TuffKlamp for a tighter fit or the low setting for a looser fit. The MaxSnap slides can be stud low for a tight tarp fit or stud high for a looser fit.
These covers are designed to sit 1 inch above the bed height, directly on top of the bed rail.
Yes, unsnapped and rolled at the cab. The vinyl cover must be rolled up to the cab and secured with the hook and loop.
Absolutely not. No. All of these applications have a 100% no drill, no damage installation.
It takes most customers 30 to 45 minutes to install these covers.
The Classic Platinum has silver-color rails with silver snaps, which slide freely in the rail, while the Blackmax uses all black components. Additionally, the Blackmax cover snaps around the entire tarp, whereas the Classic Platinum only has snaps on three sides and slides into the cab rail on the 4th side.
The tonneau can be removed from the bed/rails within minutes.
The bedliner must be an under-the-rail liner, as any over-the-rail liner will interfere with the installation.
The bedliner must be an under-the-rail liner, as any over-the-rail liner will interfere with the installation.
Yes, for a few select make and models.
Extangs exclusively designed panels feature EnduraShield skinned panels paired with a polypropylene core for a superior alternative to the traditional aluminum panel. The EnduraShield skin is constructed from a automotive grade polymer that resists denting, scratches, and UV induced fading.
Depending on the vehicle application it will weigh 50-75 lbs.
Yes, however it is not recommended.
Yes, as most styles of Encore offer the bolt lock at the cab panel.
It is extremely easy and user friendly. Simply roll the tarp to the cab and secure the cover with the supplied buckles. You can release the cab rail with the release lever located on the passenger side.
If the bed liner goes over the side rails, it will need to be trimmed/notched.
The Express is equipped with an automatic tension system.
Yes, you can roll the vinyl cover and keep it secure at the cab.
No. The Express is a no drilling/no damage tonneau installation.
30-40 minutes, tops.
The cover can either be unsnapped and rolled to the cab, or the entire cover with side, cab and tail rail can be removed as one piece.
This tonneau will work as long as the bed liner is an under-the-rail bed liner.
Yes, however we recommend that you remove the snow from your tonneau just as often as you remove the snow from your windshield.
No, however it is recommended that you apply Tonno Tonic to the vinyl fabric.
The sliding rail snaps can be reversed for either the tighter or looser position. Or, you can adjust the bow positions to the higher clamp position (to tighten the tarp) or the bottom clamp position (to loosen the tarp).
It sits 1 inch above the rail.
10 years on the vinyl cover and lifetime on the frame/components.
Extremely easy, simply release the clamps at the tail, fold the cover and loosen the clips at the cab for quick and easy removal.
To perform the installation, simply notch the areas where the clamps will be positioned. The clamps must be flush against the metal of the truck.
Yes. The Trifecta comes equipped with a supplemental clamp kit used to mount inside the track system.
Yes, it should work without any issue.
Some aftermarket truck accessories do affect the tonneau installation.
The Trifecta tonneau weighs about 35 lbs
The Trifecta tonneau must be fully folded and buckled at the cab. You cannot drive with this tonneau partially open/folded.
The Trifecta takes longer to remove from the box, than it does to install on your vehicle. This tonneau installs within minutes.
The vinyl cover can be rolled up at the cab and secured with the Velcro straps under the cab rail. You can simply remove the cab rail to fully remove the cover from the bed.
Yes. If the liner attaches over the side of the bed, you will need to notch the liner to accommodate the clamps. The clamps must be flush against the metal of the truck.
Yes, however we recommend that you remove the snow from your tonneau just as often as you remove the snow from your windshield.
No, however it is recommended that you apply Tonno Tonic to the vinyl fabric.
Yes, the tonneau clamps wall mount under the side rails.
Yes, the Tuff Tonno comes equipped with a rotating tail rail, which allows for easy tarp installation and removal.
Unfortunately, some aftermarket truck accessories can interfere with the installation of this tonneau.
The rails sit about 1" above the rails.
Yes, as long as the vinyl cover is rolled up and secured at the cab.
No, the Tuff Tonno is a no drill/no damage installation. All parts required to perform the installation are included in the box.
Not long, at all. 20-30 minutes max.
The Solid Fold 2.0 offers quick and easy installation and removal. Simply release the clamps at the tail, fold the cover and loosen the clamps at the cab.
To perform the installation, notch the areas where the clamps will be positioned. The clamps must be flush against the metal of the truck.
Yes. The Solid Fold 2.0 comes equipped with a supplemental clamp kit used to mount inside the track system.
The Solid Fold 2.0s exclusive, lightweight, 1-inch thick EnduraShield panel features an automotive grade polymer skin with a polypropylene core to provide the ultimate protection from dent and scratch resistance as well as UV fading.
The Solid Fold 2.0 weighs 50-75 lbs.
Yes, however it is not recommended.
The Solid Fold 2.0 does not offer a locking mechanism, however if you have a locking tailgate your bed is thoroughly secure. Once the tonneau is installed, you must lower the tailgate to access the bed.
Not while unsecure. The Solid Fold 2.0 must be fully folded and buckled at the cab. You cannot drive with this tonneau partially open/folded.
The Solid Fold 2.0 takes longer to remove from the box, than it does to install on your vehicle. This tonneau installs within minutes.
The Solid Fold 2.0 UTV Edition offers quick and easy installation and removal. Simply release the clamps at the tail, fold the cover and loosen the clamps at the cab.
The Solid Fold 2.0s exclusive, lightweight, 1-inch thick EnduraShield panel features an automotive grade polymer skin with a polypropylene core to provide the ultimate protection from dent and scratch resistance as well as UV fading.
The Solid Fold 2.0 takes longer to remove from the box, than it does to install on your vehicle. This tonneau installs within minutes.
The Solid Fold 2.0 carries a 90-day warranty from the date of purchase, to the original purchaser/owner.
It is quite easy and user friendly. The Revolution offers a quick removal operation. Once the cover is rolled and secured at the cab, you can remove the cover and cab rail in one step.
For over 30 years, Extang Inc. has been a leading North American manufacturer delivering a wealth of heavy-duty truck bed tonneau covers and accessories. Headquartered in Ann Arbor, Michigan, the company is relentlessly striving to bring products that provide significant benefits and cause no damage to your pickup truck. Every Extang tonneau cover is designed to enhance utility, convenience, and appearance of your vehicle in a matter of few minutes. The covers are capable of withstanding extreme weather conditions, keeping water and dust out of the truck bed. The list of benefits offered by the Extang tonneau covers goes and on, and no wonder why – this brand holds more patents than any other brand in the industry. Perhaps that is why Extang is considered to be Americas number one manufacturer of tonneau covers.