Edelmann® - Power Steering Pressure Line Hose Assembly

5 reviews|Item # mpn2136580|Similar Products
$49.95
In Stock (45) - Ships within 24 hrs
Vehicle Specific
  • Please Select Vehicle Below
Authorized Dealer
Have a Question? Ask a Specialist
888-577-6964Live Chat

Vehicle Fitment

MakeModelYear
FordF-150 2004-2008
F-350 2004-2008
Lobo 2005-2008
LincolnMark Lt 2006-2008

Product Details

Power Steering Pressure Line Hose Assembly (92124) by Edelmann®. Quantity: 1 per Pack. Engineered by the company with more than 50 years of steering hose manufacturing experience, Edelmann power steering replacement hoses ensure OE-style form, fit, function, and long life. They’re built to withstand extreme conditions and are resistant to deterioration.

Specifications

End 1 Diameter: 13 mm
End 1 Type: Male Captive O-Ring
End 2 Diameter: 16 mm
End 2 Diameter (mm): 16 mm
End 2 Type: Swivel O-Ring
Switch Port: With Switch Port
Length: 58.5"

Features

  • Highly resistant to stress conditions
  • Original equipment equivalent
  • Reliable functioning and long service life

Edelmann hoses are constructed to look, fit, and function exactly as the original equipment, and last even longer thanks to premium materials and design that relieves stress and eliminates tube fatigue. They are engineered to withstand stress conditions such as heat, oil, ozone, or pressure that causes ordinary assemblies to fail prematurely. Tubing is Pro-coated or terne coated and couplings and fittings are zinc-chromate plated for rust and corrosion protection. Pressure hoses feature double plies of high-tensile strength braided fabric that helps resist pulsation pressures up to 1,500 psi and bursting pressures up to 8,900 psi.

Edelmann® is one of the leading designers and manufacturers of a wide range of auto parts and tools, from power steering hoses to rebuild kits. The company was founded in Chicago in 1909, and 100-plus years of dedication to quality make Edelmann well-known and trusted worldwide. Edelmann's manufacturing experience started with production of anti-freeze testers, automotive brass fittings, and general products in the early 20th century. In 1960, the company began production of the power steering hose. A decade later, the Edelmann family added the Plews division and a new line of lubrication products including funnels, measures, grease guns, etc. E. Edelmann & Co. company was officially renamed Plews/Edelmann in 1995.

Brand:
Part Number:
92124
UPC:
021597921240

Reviews

(5)
Only authorized customers can leave a review on our website. We would love to know what you like or dislike about the product. Share your opinion on product quality, appearance, installation, and other characteristics.
Edelmann® - Power Steering Pressure Line Hose Assembly
/5
1-5 of 5 Reviews
5 of 5
Good Buy
This part did the job and after replacing the old hose, and I didn't have any trouble with leaks after installing it. Be aware that taking the old hose off is extremely challenging on one end with the threaded fitting that seemed to have galled in place if you have had your truck for a while. I recommend cutting the old hose off right at the fitting. After that, I used a deep six sided 3/4" socket to remove the old fitting (it is a little larger than the fitting head which was an 11/16", but there was some metal that was still on the fitting which I had to fit the socket around). I tried using a small adjustable wrench at first so I could get that fitting out, but it never budged and all I ended up doing was almost stripping the head of the fitting until it was almost completely rounded off - so cutting and using the hex socket is really what I recommend. After that, use the steering fluid on the threads and dip all the o-rings you get in the fluid before putting them on to make sure they seal well. Getting the new line on where the fitting screws in at same place can be quite challenging but is not the fault of the line itself, it is just the way the parallel threads are made and you have to get it started with your hand. After the new fitting bites a little, I had to use the socket extension and a hammer to slightly tap the fitting so it would fully start to bite and start to thread correctly. If you have been using your truck for a while, just cutting and getting the old line out at the threaded fitting is really what is going to suck up most of your time. Good luck to you when you replace this line because it took me about 4 hours in all to just remove the old line. The Ford engineer that came up with this fitting needs to have their head examined. They should have used a swagelok type compression tube fitting instead of that flared threaded crap.
Posted by Edward (Strongsville, OH) / April 29, 20142004 Ford F-350
Excellent, great fit, no issues, easy and quick replacement. Perfect fit.
Posted by Jaime (Edinburg, TX) / March 16, 20201994 Nissan Pick Up
5 of 5
Edelmann® - Power Steering Pressure Line
Edelmann® 92315 - Power Steering Pressure Line Hose Assembly
Packaged well. Secure. Very good quality.
Posted by Peter D. (Burbank, CA) / January 31, 20201997 Nissan Pathfinder
Hose construction appears sound. Fitment was correct.
Posted by Al (Las Vegas, NV) / November 30, 20181964 Plymouth Belvedere
It works perfect and great price.
Posted by Heather (Menlo, GA) / March 22, 20182001 Nissan Xterra

Questions and Answers

(0)
If you have any questions about this product, please don't hesitate to ask us. We will be happy to help you!
CONTACTS
CUSTOMER SERVICE
INFORMATION
CARiD FacebookCARiD XCARiD YouTube ChannelCARiD PinterestCARiD Instagram
All manufacturer names, symbols, and descriptions, used in our images and text are used solely for identification purposes only. It is neither inferred nor implied that any item sold by CARiD.com is a product authorized by or in any way connected with any vehicle manufacturers displayed on this page.