Vehicle Fitment
Make | Model | Year |
---|---|---|
Buick | Regal | 2018-2020 |
Make | Model | Year |
---|---|---|
Buick | Regal | 2018-2020 |
Stage 1 Street Plain Front Brake Kit (S1KF2046) by EBC®. Enhance your daily driving with confidence and peace of mind. With the EBC Premium Street Brake Kit, you will forget about brake shudder or embarrassing brake squeal when coming to a stop. The kit combines the Ultimax Pads and stock replacement rotors for the ultimate OEM pad and rotor combination at an affordable price. The anodized layer is designed to disappear in the area that the brake pads contact the rotor.
Bolt Circle: 115mm (4.53") |
Centre Hole Diameter: 70.5mm (2.78") |
Driving Style: Daily Driver |
FMSI Cross Reference: Front: D1001, Rear: D2189 |
Rotor Height: 45.5mm (1.79") |
Lug Quantity: 5 |
Minimum Rotor Thickness: 27mm (1.1") |
Nominal Rotor Thickness: 30mm (1.2") |
Outside Diameter: 345mm (13.6") |
Rotor Construction: 1-Piece |
Rotor Material: Cast Iron |
Rotor Style: Plain |
Rotor Type: Vented |
Rotor Benefits:
Why pay dealership prices that are marked up 100% when you can purchase EBC high-quality RK Series Premium OE Replacement rotors for less? Unlike cheaper, inferior replacement rotors that may look identical to original equipment, EBC builds these to match original factory dimensions and machines them to extremely tight tolerances. But they did not stop there. EBC has applied their engineering expertise to create an iron compound that exceeds the quality of most original material blends, so these rotors actually improve on factory levels of heat buildup, brake noise, vibration, and wear. A higher percentage of carbon and silicone is present which leads to the formation of graphite during the curing process. When graphite is present, the rotor itself takes on qualities of a denser, softer material. Heat is more evenly dispersed to reduce warping, cracks are less likely, and vibration-related noise is greatly reduced. RK Series Premium OE Replacement Rotor Kit is anodized for corrosion resistance, and rotors should be fully ready for performance driving after a 500-mile break-in period.
EBC Ultimax™ OEM Replacement Brake Pads are designed to match the exact dimensions of original equipment with extremely tight tolerances to ensure proper fit, even wear, and absence of rattles and squeaks. A patented low-metallic aramid compound is made with DuPont Kevlar and Twaron composites to reduce the amount of steel wool necessary, so these pads cause far less abrasive wear on rotors without compromising brake pad efficiency or longevity. In government R90 tests of replacement brake components, EBC pads have shown to deliver equivalent performance, bedding, cold temperature operation, and speed sensitivity when compared to original manufacturer parts. EBC’s aramid material also ensures the pads are soft enough to avoid brake squeal, but not so soft that pad longevity becomes compromised. On some German vehicles, you may even see longer life with EBC pads than the original factory brake pads provided.
If you’re installing Ultimax™ OEM Replacement Brake Pads with new brake rotors, you’ll find down the road when the time comes to replace the pads again, rotors will still be usable enough to last through another set of brake pads. And if you are installing EBC pads without replacing rotors, pre-chamfered pad edges will mate perfectly against the grooves and lips that normally form on the rotor surfaces, so the meat of the pad makes contact against the rotor center where it counts. These pads also feature a red top layer coating designed to scour glaze and hot spots off worn brake rotors during the break-in process. As it does that, the coating also serves to provide a higher level of grip to counteract low friction levels that exist before bedding is complete. Built-in shims ensure any high-frequency vibration is absorbed rather than transferred as squealing noise, even under the most extreme weather conditions.
Founded and based in the United Kingdom, EBC Brakes® is a premiere producer of brake components for passenger cars, trucks, buses, motorcycles, ATVs, and even scooters. EBC brake pads and rotors are preferred by fleet operators of emergency vehicles, livery cabs, and by discerning racers all over the world for the effective grip, superior lifespan, resistance to heat buildup, and proper fit they deliver. From the company president down to every employee, EBC strongly believes that brake components that are truly superior must be constructed from the most effective materials and also offer the lowest environmental impact possible. Likewise, EBC will never put their name on any products that cut corners in development, quality control, or are manufactured using sweatshop working conditions where human rights are not valued. When you want the best, most responsible brake components that meet or exceed OEM specification without dealer OEM markup, EBC Brakes is the only name you need to know.