Draw-Tite® - Class 2 Frame Trailer Hitch with 1-1/4" Receiver Opening (W/O Drawbar, 3500/300 Weight Capacity)

36 reviews|Item # mpn1917195|Similar Products
$296.04
In Stock (7) - Ships within 24 hrs
Vehicle Specific
  • Please Select Vehicle Below
Notes:
  • Always consult your vehicle's owner's manual for actual weight capacities
  • No Drilling Required
Authorized Dealer
Have a Question? Ask a Specialist
800-505-3274Live Chat

Vehicle Fitment

MakeModelYear
ChryslerTown and Country 2008-2016
DodgeGrand Caravan 2008-2020
RamCV 2012-2015
VolkswagenRoutan 2009-2014

Product Details

Class 2 Frame Rear Trailer Hitch without Drawbar (36455) by Draw-Tite®. Limited Lifetime Warranty. The Weight Carrying Capacity is 3500 lbs, while the Tongue Weight is 300 lbs, and the Receiver Tube Opening Size is 1-1/4". A sturdy hitch from Draw-Tite is engineered and built from the ground up to fit your vehicle perfectly, and allows you to tow safely and easily.

Notes

  • Always consult your vehicle's owner's manual for actual weight capacities
  • No Drilling Required

Specifications

Weight Carrying Capacity(WC): 3500 lb
Tongue Weight(TW): 350 lb
Class: 2
Receiver Size: 1-1/4"
Mounting Hardware Included: Yes
Drawbar Included: No
Finish: Black Powder Coat

Features

  • 1-1/4" Square Receiver Tube Opening
  • Includes Removable Drawbar, Pin and Clip
  • Neat Appearance, All Frame Attachments
  • A-Coat Base with Black Powder Coat Finish
  • Custom Built According to Manufacturer and Model Year
  • Ensures Perfect Fit and Top Towing Performance
  • Computer-Aided Design and Fatigue Stress Testing
  • Designed to Withstand Road Abuse Within Specified Capacities
  • Backed by a Nationwide Limited Lifetime Warranty

Trailering puts a strain on your towing vehicle. And it can put a real strain on your nerves if you're not set up right. You need a properly-engineered hitch with the appropriate rating for the weight of your fully-laden trailer. If your trailer is big enough, add in a trailer brake controller and the wiring to it, and perhaps a weight-distributing hitch. All that gear needs to be installed and rigged by someone knowledgeable in trailering. Draw-Tite has a hitch receiver for your vehicle that will allow you to tow the maximum amount permitted by the vehicle manufacturer safely. They also have hitch balls and ball mounts for every class of towing, and a full catalog of other gear that will make your trailering as safe and as easy as possible.

Draw-Tite® is the premier brand of custom trailer hitches. Established in 1946 and created with a passion for outstanding performance the brand has come to represent one of the best custom fit vehicle products available today. Each hitch design must pass rigorous testing to become TESTED TOUGH™. The addition of increased tongue weight capacity and an all new accessory pairing guide make the Draw-Tite brand your best choice for years of dependable service.

Brand:
Part Number:
36455
UPC:
742512364552

Reviews

(36)
Only authorized customers can leave a review on our website. We would love to know what you like or dislike about the product. Share your opinion on product quality, appearance, installation, and other characteristics.
Draw-Tite® - Class 2 Frame Trailer Hitch with 1-1/4" Receiver Opening (W/O Drawbar, 3500/300 Weight Capacity)
/5
1-10 of 36 Reviews
Took a little longer than we thought to receive this hitch. The hitch was a little bent from shipping but after we straighten it everything was good. Went up easy and looks great. Would purchase again.
Posted by Jon (Dousman, WI) / June 30, 20152008 Chrysler Town and Country
It arrived on time, but as others have said, it had broken through the box on one side. Powder coat held up, no major damage. The instructions in the box were wrong, a few details were out of order, and some other steps could have been added for ease of install. Google the model and videos come up that show a better sequence that saved us lots of time. Watch out for the bolts on the car. It has a spot welded nut on them inside the frame. We popped one of the nuts loose, but had a way to shim it with where it was.
Posted by Daniel (Ankeny, IA) / June 14, 20152008 Chrysler Town and Country
You have to cut the excesses on each side of the hitch, otherwise it rubs the muffler pipes. Then, the spare tire must be deflated to 50% so that it will fit back into place. This work must be done by a professional.
Posted by Horacio (San Juan, PR) / July 01, 20212020 Acura RDX
Finally got around to installing it. It looks great on my Colorado. I chose this one as the weight capacity is greater than the Colorado is ratted for, I'm a big believer in a little stronger is always the way to go. My 1/2 inch pneumatic impact gun picked this job to break, so I used hand tools. Have a big breaker bar as Chevy uses a thread locker and they fight you. (buying a new 1/2 impact today). I used my ramps and backed my Colorado just part way up to increase my working room and then varied my height as needed. (do not forget to chalk the wheels) The two vertical side plates are custom-made for the frame so it's important to have an assistant to help slide it into place as trying to do it by myself was impossible, as if it's just a little cocked it's a no-go. We even lubricated the plates and frame beams to help. But, that said there is nothing wrong with a nice tight fit.
Posted by Michael (Arvada, CO) / April 13, 20212018 Chevy Colorado
No cutting or drilling. Hardest part was holding the hitch up (on my back) while trying to install the washers and nuts.
Posted by Ronald (Sebastian, FL) / October 07, 20202017 Ford Fiesta
Fast shipping. Easy to follow instructions. A grinder definitely makes installation easier.
Posted by Customer / September 20, 20202020 Jeep Compass
Installed on a 2013 Nissan Rogue. The second hole from the rear on the driver's side is slightly offset on the hitch. I believe this may be a manufacturing defect. I was still able to install the hitch, but the offset of the second hole meant I couldn't put in the third bolt (frontmost) because the hole in the hitch was now misaligned. I tried to angle it every way before fully tightening any bolts, but it would not align correctly. I was still able to install the two rearmost bolts on each side, creating a secure connection between the vehicle and the hitch.
Posted by Customer / August 26, 20202013 Nissan Rogue
5 of 5
Perfect Fit
Draw-Tite® 76275 - Class 3 Max-Frame™ Square Trailer Hitch with 2" Receiver Opening (7000/1125 Weight Capacity)
It bolted right up and fit perfectly.
Posted by Customer / July 14, 20202020 Ford Ranger
The hitch is good quality, and installs fairly easily, but there is no way to do it in 15 min. The installation instructions say 90 min for a professional shop. I am a mechanic, and it took me about 2.5 hrs ( I did have a 3-year-old helper). Just plan for the time. You will need a saw for cutting the bumper cover as well as sockets and wrenches.
Posted by M shaun (Mount Vernon, WA) / July 04, 20202016 Honda Odyssey
This trailer hitch was easy to install in my car and it works just perfectly.
Posted by Juan (Midvale, UT) / March 06, 20202014 Chevy Cruze

Questions and Answers

(0)
If you have any questions about this product, please don't hesitate to ask us. We will be happy to help you!
CONTACTS
CUSTOMER SERVICE
INFORMATION
CARiD FacebookCARiD XCARiD YouTube ChannelCARiD PinterestCARiD Instagram
All manufacturer names, symbols, and descriptions, used in our images and text are used solely for identification purposes only. It is neither inferred nor implied that any item sold by CARiD.com is a product authorized by or in any way connected with any vehicle manufacturers displayed on this page.