1. REMOVE FILTER:
Remove the air filter from the intake pipe, the OE airbox, or the custom assembly. Handling carefully, lightly tap off all loose dirt and debris.
2. APPLY CLEANER:
Liberally spray Dryflow™ cleaner onto both sides of the filter, with the majority of it applied to the dirty side. Allow to soak in for 10 minutes. Do not allow it to dry on the air filter.
3. RINSE FILTER:
Rinse off the filter element with cool or warm (not hot) water from the clean side out in order to flush the dirt out of the filter. It may be necessary to use your fingers on the hose, to apply light water pressure. Repeat steps 2 and 3, until the water flowing through the media is completely clear of any dirt and debris.
4. DRY AND RE-INSTALL FILTER:
After rinsing, gently shake off excessive water and allow to dry naturally or carefully use compressed air to help speed the drying cycle. Re-install the filter onto the intake system, airbox or custom assembly once it is dry or just slightly damp. Follow all original installation instructions.
Founded in 1987 by John Concialdi (J.C.) and Bob Sullivan as a tuning performance shop, AEM® offers cutting-edge products that are rigorously tested in its laboratories, and the company confirms its results on the asphalt of the track. With its location in Compton, California, AEM was embedded in the tuner market from the very beginning. It was a matter of being in the right place, at the right time, with the right technical know-how. Innovation has always been the company’s core competency. It continues to lead the way with high-end products that push the envelope of what is possible. Whether you’re looking for an air filter, air intake system, or exhaust system, you’ll discover uncompromising quality paired with an eye-catching and show-worthy appearance.