Feature enable: The Tazer can unlock SRT Drive modes, including Track, Valet, ECO (2015-18 Scat Pack), enable factory Sport Mode (5 speed and 8 speed), SRT EVIC Performance pages, and SRT performance pages* in the Uconnect 8.4 radio. Enable paddle shifters if you add the factory paddle-equipped steering wheel. Enable factory fog lights, backup camera, extra video input and more. Disable TPMS. Change DRL’s. Enable Shift Light on 2015+ (6.4L). Disable in motion navigation lockout. Disable seatbelt reminder chime. And more, see user guide for full list.
Line Lock: Press 2 steering wheel buttons while stopped, and the ABS valves will hold the vehicle with the front brakes so you can hit the gas and do a perfect burnout as long as you wish, with no wear on the rear brakes. No plumbing required! This is an ideal alternative to the traditional plumbed-in solenoid type line lock/roll control. Super simple and cannot be detected! When Line Lock is in use, it temporarily disables traction control and for AWD cars, keeps the car in RWD mode.
Light Shows: Using the key fob or steering wheel buttons and added dash menu, turn on a light show that flashes the exterior lights in 9 different patterns – there are 6 pre-configured patterns and 3 make-your-own. Perfect for car shows and parades. (can be unlocked for in-motion use, only for legal emergency use. Contact tech support for instructions)
Force Engine Mode: Allows you to choose which engine mode to stay in. Very useful on 2015+, where you want the active exhaust to remain open with increased throttle response without the transmission being in track mode.
Force Transmission Mode: Allows you to choose which transmission mode to stay in.
Force Power Mode: Force key mode (Black/Red/Valet) For Hellcats, you can force red key performance while using the black key. For most 2015+, you can force valet mode.
Startup Drive Mode: Like driving in Sport or Track mode every time you get in your car? Tazer can set the startup drive mode for you, so you don’t need to switch modes every time you get in the car.
Auto stop-start Disable: If you have a Grand Cherokee or Durango with Auto StopStart, you may find it annoying and want it to default OFF. The Tazer can do this for you, no need to press that disable button every time you start the car.
Steering Wheel shifting**(SWS): Allows you to use your steering wheel’s cruise+/- buttons to manually control gear shift while keeping your hands on the wheel. SWS mode is enabled after placing the vehicle in AutoStick mode using the console shifter. Once in AutoStick, use the cruise buttons to shift (only when cruise control is turned off)! This feature can be enabled or disabled at any time using the steering wheel buttons.
AutoUpshift**: Set your own shift points when in AutoStick – Using steering wheel buttons or ZPU Utility, dial in any RPM for upshifts in AutoStick mode – perfect for high-power high-revving track use. This feature requires that “sport mode” is enabled (2012-2014 only).
Peak RPM Display: Will display actual shift RPMs after each shift – great when adjusting AutoUpshift to squeeze every last bit out of that high revving cam, or to check what RPM you hit when shifting manually.
0 to 30 and 0 to 60 Timer: Will display 0 to 30 and 0 to 60 times on EVIC display. Good for the 2011’s that can’t enable SRT pages.
Force AWD modes: On AWD models, force the AWD system to stay in RWD or AWD, instead of letting the car decide on its own. Good for racing, drifting, etc. Or set it back to “normal” whenever you wish.
Reset Adaptives: Will reset TCM adaptives any time you wish with a simple push of the “BACK” and cruise on/off buttons.
ESP full on/off: Press and hold the ESP button for 7 seconds to TOTALLY disable the ESP, ABS, AWD systems. Press and hold again to turn it back on.
Remote Windows: Raise and lower front windows from the keyfob.
Button Remapping: Use the Adaptive Cruise distance buttons (when ACC is off), or install “Aux” buttons or viper cruise button bank and map the buttons for quick access to many of Tazer’s functions.
Video Inputs: The tazer can enable two extra video inputs for a front camera or video player or both on the 2015-2106 RA3/4 uconnect radio. It can add one input on the 2017+ UAQ and UAS radios. The AV Cables are needed to add video and audio feeds..
Vehicle Settings:
Change Tire Size
Change Gear Ratio
Change Transfer case LOW ratio
Enable/Disable TPMS system
Change TPMS pressure warning limit front/rear (25psi-85psi)
Enable/Disable Backup camera
Enable/Disable Cargo Camera input (8.4 Uconnect only)*
Enable/Disable CD (wired audio) input*
Enable/Disable TravelLink/XM traffic and weather
Change Daytime Running Lights (DRL) region (type)
Change DRL location
Enable/Disable DRL Dropout function
Enable/Disable factory fog lights
Enable/Disable Fog Light Dropout (when Fogs shut off while High Beams are on)
Enable/Disable Factory Halo lights (including BCM output for adding Halo’s)
Enable/Disable One-touch lane change
Change Headlight type (std/LED)
Change Fog light type (std/LED)
Change Taillight type (std/LED)
Change Front Turn Signal type (std/LED)
supports aftermarket LED lights too
Enable/Disable Trailer Tow setting
Enable/Disable Aux Button settings
Enable/Disable Blind Spot detection (if hardware added or removed)
Enable/Disable/Change Parksense configuration
Disable Electronic Sway Bar (if removed from vehicle)
Disable Front Axle Disconnect module for axle swaps
Disable Front and Rear Lockers for axle swaps
Disable Electronic Steering Pump for hydraulic steering conversions
Change cluster splash screen Wrangler/Sahara/Rubicon
Change HVAC controls setting to allow use of dual zone controls on single zone Jeep (for those upgrading the 5? radio)
Enable HomeLink for those that add the Homelink Visor and harness
Enable Proximity Entry for those that add the door handles and harnesses
Enable Automatic Headlamps (If hardware added)
Enable/Disable PANIC button on remote
One-touch return-to-stock - Quick “unmarry” function returns all vehicle settings back to stock.
Live Functions:
AutoStopStart disable - remembers last state of the auto stop start system and will set it for you the next time you start the vehicle
AutoTracKill - remembers last state of traction control system and will set it for you the next time you start the vehicle
Can disconnect sway bar in 2WD up to 30mph (any speed if button mapped SwayKill is used)
Can use backup camera and added cargo/front/undercarriage camera or media player at any speed
TurnCAM - automatic backup camera when turn signals are used (8.4 uconnect only)
Dark Mode- Turns off all exterior lighting and dash/radio/shifter lights while parked with engine running.
Light Show mode - 6 preset and 3 make-your-own Light shows that flashes all the exterior lights, perfect for car shows/first responders/off-road visibility. Control from Key Fob or steering wheel buttons. Can be enabled for in-motion use for parades, off-road and legal police/EMS.
Axle Locker control (Rubicon) - Engage lockers in 2WD and 4Hi on demand. TC Kill - Tuns off traction control, stability control and ABS.
Hood Alarm - When the vehicle theft alarm is armed, monitors hood activity and will sound the alarm and flash light shows if opened.
Cooldown mode: Turn engine fans on demand when the ignition is on, engine not running
Line Lock: Can lock front brakes for an easy burnout
Rock Crawl: Can lock all four brakes by pressing steering wheel buttons to hold the vehicle still, especially helpful when off-road.
Winch Mode: Raise idle to 2000 RPM with a simple button press.
Button Mapping: Use cruise up, down and right buttons as quick-access to some of Tazer JL’s functions, when cruise control is off.
Display DTC’s - Shows the diagnostic codes that’s making the check engine light come on.
Clear CELs - Reset that pesky check engine light. Good when you have mods that set the light and you know exactly why.
0 to 30 and 0 to 60 Timers - Displays 0-30 or 0-60 times on EVIC display
Automatically blanks license plate lights when in Reverse on Gladiators, to remove glare on the backup camera at night.
Vacuum/Boost gauge - Watch real-time Maniford Pressure, great for boosted/turbo applications
Firmware updates - new firmware is available periodically, always free!.
Vehicle Settings:
Change Gear Ratio
Change Transfer case LOW ratio
Enable/Disable TPMS system
Change TPMS pressure warning limit front/rear (25psi-85psi)
One-touch return-to-stock - Quick “unmarry” function returns all vehicle settings back to stock.
Live Functions:
AutoStopStart disable - remembers the last state of the auto stop-start system and will set it for you the next time you start the vehicle
AutoTracKill - remembers the last state of the traction control system and will set it for you the next the time you start the vehicle
Can disconnect sway bar in 2WD up to 30mph
Light Show mode - 6 preset and 3 make-your-own Light shows that flashes all the exterior lights, perfect for car shows/first responders/off-road visibility. Control from Key Fob or steering wheel buttons. Can be enabled for in-motion use for parades, off-road and legal police/EMS.
Cooldown mode: Turn engine fans on-demand when the ignition is on, engine not running
Line Lock: Can lock front brakes for an easy burnout
Rock Crawl: Can lock all four brakes by pressing steering wheel buttons to hold the vehicle still, especially helpful when off-road.
Winch Mode: Raise idle to 2000 RPM with a simple button press.
Display DTC’s - Shows the diagnostic codes that’s making the check engine light come on.
Clear CELs - Reset that pesky check engine light. Good when you have mods that set the light and you know exactly why.
0 to 30 and 0 to 60 Timers - Displays 0-30 or 0-60 times on EVIC display
Firmware updates - the new firmware is available periodically, always free!
Perf menu:
Adjust for alternate tire sizes
Adjust for alternate axle gear ratios
Adjust for an alternate transfer case LO range ratio
TPMS menu:
Disable the TPMS system if desired
Change font/rear TPMS warning PSI limit
Radio menu:
Disable Backup camera
Enable Cargo/front/undercarriage Camera input
Enable CD audio input
Disable Travellink (weather warnings included)
Lighting Menu:
Change DRL location
Disable DRL Dropout
Enable Fog lamp output
Disable Fog lamp dropout
Disable one-touch lane change
Disable Halo’s
Set LED 3rd brake light type.
Set LED Fog light type
Set LED tail lamp type
Set LED front turn signal type.
Set Trailer Tow output for use with Mopar kit
Other menus:
Disable/Enable Front and Rear Lockers (for axle swap on Powerwagon)
Enable Aux switch settings on the radio
Enable Blind spot detection (sensors required)
Change cluster splash screen to various Ram models
Enable/Disable PANIC button on remote
Live features:
Light shows: Can be accessed from the key fob or the on-screen menu. Six pre-set light shows, and three make-your-own shows included. Set from the factory to only operate when parked, but can be unlocked for off-road, parade, and emergency personnel use.
Automatic Power folding mirrors – mirrors fold and extend when the ignition is turned on/off
Control front windows up/down from keyfob
Disable Navigation in-motion lockout – enter addresses while the vehicle is moving
Disable camera lockout – use the backup camera and/or added cargo/front/undercarriage camera at any speed for any length of time
Auto Traction Kill – remembers the last state of traction control and will set it on start-up
Auto stop-start Disable – remembers the previous state of ESS system and will set it on start-up
Auto Tow Mode – remembers the last state of Tow mode and will set it on start-up
TurnCAM – can turn on backup camera whenever turn signals are used
0-30 and 0-60 timers
Cooldown mode – run engine fans when Ram is off, to aid in cooldown
Winch mode – raise engine idle to 2000 RPM while winching or jumping another vehicle
Line Lock: Can lock front brakes for an easy burnout
Rock Crawl: Can lock all four brakes by pressing steering wheel buttons to hold the vehicle still, especially helpful when off-road.
Button Mapping: Use cruise up, down and right buttons as quick-access to some of Tazer DT’s functions, when cruise control is off
Clear Check engine light
Vehicle Settings:
Calibrate speedometer for non-factory tire sizes
Configure vehicle for gear ratio changes
Can disable Tire Pressure Monitoring System warnings, or modify PSI settings*
Can enable/disable Daytime Running Lights and the user can select lights to use (application dependent)
Can enable the addition of factory fog lights
Can support LED lights
Can disable Fog Light Dropout (allowing hi and low beams and fog lights on simultaneously)
Can enable the addition of factory backup camera and aftermarket front camera*
Can disable SiriusXM Travellink traffic and weather warnings
Can enable aux video/audio for front camera and/or external video source (2018’s can only enable one cargo cam input)
Can enable factory aux buttons, support addition of power-folding mirrors, and more
One-touch return-to-stock – Quick “unmarry” function returns all vehicle settings back to stock. No need to remember or write down original settings when returning to stock before dealer service.
Live Functions:
AutoFold – Can automatically extend and retract power folding mirrors when vehicle is turned on and off
Windows from keyfob – can open and close front door power windows from the keyfob
Line Lock – Uses ABS solenoids to lock the front wheels for burnouts at the track or just for fun
Can enable in-motion navigation address entry
Light Show mode – 6 preset and 3 make-your-own Light shows that flashes all the exterior lights, perfect for car shows. Control from Key Fob or steering wheel buttons. Can be enabled for in-motion use for parades, off-road and legal police/EMS.
Cooldown mode: Turn engine fans on demand when the ignition is on, engine not running – good for the staging lanes at the track or after a run in the trails.
Winch Mode: temporarily raise engine idle to 2000 RPM when winching or jump starting another vehicle.
Spoof4Lo: raises idle and shift points, and allows use of lockers and sway bar disconnect in any transfer case mode on Power Wagons
Clear CELs – reset that pesky check engine light. Good when you have mods that set the light and you know exactly why.
Fully disable ESP/Traction Control by pressing and holding ESP button
0 to 30 and 0 to 60 Timers – Displays 0-30 or 0-60 times on EVIC display
Firmware updates – new firmware is available periodically, always free and posted to the Z Automotive website. Use ZPU programming utility, also on the website, to load the firmware.