Product Details
Ford F-450 2017, EVO Preloaded Module and T-Harness Combo Kit by Fortin®. The EVO-FORT3 is the ultimate Factory Fit, ALL-IN-ONE data immobilizer bypass, doorlock, alarm & remote start interface with T-Harness combo module for 2013+ Ford vehicles. It raises the standard of hassle-free installation convenience to a whole new level. It uses a multiple bus architecture with 10 separate communication ports that provide more complete functionality on every supported vehicle.
Notes
- Works with: Flash Link Manager \ DCryptor \ RF Kits \ Telematic & GPS Modules \ Sensor Modules \ External Triggers
- Remote Starters Uses: Features for remote-starter installations. \ DCryptor \ Remote Start \ Push to Start Ignition \ Immobilizer System \ Factory Alarm \ Door Locks \ Trunk (open) \ Parking Lights \ Heated Mirrors \ Heated Seats \ Rear Defrost \ Door Status \ Hood Status \ Trunk Status \ Tachometer \ Hand-Brake Status \ Foot-Brake Status \ Retained Accessory Power \ T-Harness \ OEM Remote Monitoring
- Immobilizer Bypass Uses: Bypass the vehicles immobilizer (VATS, Passlock, PATS and PassKey Transponders) for enabling remote car starter installations. \ DCryptor
- A firmware update is required: Using the 2-way datalink port with an equipped remote-starter, security-system or RF-KIT greatly simplifies installation. \ Updated firmware and installation guides are posted on a regular basis. Fortin recommend that you update this module to the latest firmware and download the latest installation guide(s) prior to the installation of this product. \ Secure Clip Harness
- Alarm Systems Includes: Features for Alarm system installations. \ Factory Alarm \ Door Locks \ Trunk (open) \ Parking Lights \ Door Status \ Hood Status \ Trunk Status \ T-Harness \ OEM Remote Monitoring
- Operating Requirements: Resources required for operating the unit in the vehicle. Does not include programming. \ Key Takeover
Specifications
3 x CAN-Bus controllers. |
3 x General purpose controllers (J1850, Class 2, encrypted key etc.). |
1 x On-board relay (SPDT). |
1 x On-board relay (DPDT). |
1 x Analog controller 0-12VDC @ 20mV steps (MUX). |
Includes
- 1 x EVO-ALL control module.
- 1 x Warning label.
- 1 x 20 Pin general purpose harness.
- 1 x 4 Pin Fortin 2-way data-link harness.
- 1 x Factory Fit GATEWAY T-Harness.
Features
- 3 x On-board LEDs for simplified programming and diagnostics
- 1 x Factory Fit Gateway style T-Harness for easy install
- 1 x 2-way datalink port for data-to-data (RS-232) communication with compatible remote-starters and security-systems
- 1 x 20 Pin general purpose plug for wire-to-wire connections with non-datalink equipped remote-starters and security-systems
- Self-Learning algorithm automatically detects the vehicle during programming and adjusts accordingly
Advanced Features:
- Built-in advanced features for installations
- Built-In Alarm System
- Remote Start
- OEM Remote Monitoring
- Stand Alone Remote Starter
- 3X LOCK Remote Starter
Fortin® is born from a real desire to build products and solutions that will help vehicle aftermarket electronic installers to perform easier and faster installations. Over the last decade, Fortin dedication to innovation combined with strong expertise in multi-level car integration drove us to deliver the most reliable and cost-effective interface and remote starter platforms on the market. Today, with the evolution of connected vehicles a new era is on the horizon and Fortin team embraces the challenge of setting the bar in fast installations.