Product Details
Volkswagen Passat 2016, Carbon Alloy Slotted Vented Brake Rotor by Dynamic Friction Company®. Quantity: 1 Per Pack. The Dynamic Friction Tow and Sport Coated Slotted Brake Rotor is an excellent upgrade to your stock rotor as is engineering with premium G3000/G11H18 iron castings for maximum durability. And unlike standard rotors, this one comes fully coated to ensure long-lasting performance. The coating also ensures the rotor is ready to install without any additional preparation or modification. Without the need to clean or modify the rotor, you get to save lots of time and money during installation. All Sport Coated Slotted Rotors by DFC go through rigorous machining and testing processes for more even and faster brake pad bed-in and quieter and smoother stops. They are 100% precision cut and mill-balanced for smoother stopping, and they are made to meet the same form, fit, and function as OEM brake rotors. With these DFC rotors in your vehicle, you can expect nothing but the best possible braking right out of the box compared to any other rotors available in the market!
Specifications
Driving Style: Performance / Racing |
Rotor Design: Optional Design Full Cast |
Rotor Style: Slotted |
Rotor Material: Cast Iron |
Rotor Type: Vented |
Quantity: 1 Per Pack |
Features
- Sold each, DFC Slotted brake rotors are ideal for improved stopping power, hauling, towing, over-sized tires
- Made using premium G3000/G11H18 iron castings for strength, stability, and durability
- Fully coated to provide high-performance corrosion protection
- Slotted design creates a good clean contact surface for improved brake output
- 100% precision mill-balanced for smoother stops and zero vibration at any speed
- Rigorous testing to ensure superb braking performance even in harsh conditions
- Install easily with no modifications required
Benefits:
- Ready to Install - No additional preparation needed. Saves time and money during installation process
- Superior Corrosion Protection - Provides excellent cyclic corrosion performance when tested according to automotive manufacturer's test methods incorporating heat, salt spray (withstands 400 hours), and humidity (SAE J2334, GMW 14872, Ford CEPT: 00.00-L-467, Asian CCT)
- Environmentally Friendly: Meets the following regulations: Environmental Protection Agency (EPA), Chrysler CS-9003, General Motors GMW 3059, Ford WSS-M99P9999-A1 (Hex 9), the EU Directives on End of Life Vehicles (ELV) and Electrical Equipment (RoHS)
- No Toxic Metals: Free of chromium, nickel, cadmium, lead, barium, and mercury
Each rotor is engineered to match the OE vane configuration, including the OE split-core technology to ensure proper and maximum heat dissipation. Additionally, all cores are dipped with a specifically formulated paint in order to provide a smoother finish inside the vane structure. The smooth finish will improve air flow as well as reduce the amount of machining required in order to properly balance the finished rotor during the mill-balancing process. Next, the castings are sent to state of the art machining facilities, where each rotor is machined to the tightest tolerances available in the market today. They can guarantee specifications of .010mm disc thickness variation (DTV) and .050mm maximum lateral runout. Though in practice, they regularly achieve .007mm DTV and .025mm maximum lateral runout. Then, the rotors are fine-turned to a maximum of 1.6 RMS. The objective of these strict tolerances is to create the smoothest possible finish, which improves initial break-in due to the increased contact between the pad and the rotor. After all of the machining processes are completed, each rotor passes a 100% electronic inspection station that measures over 20 attributes to ensure that each rotor meets OE specifications. This further guarantees that each and every rotor delivered to you is trouble free. Coupled with application-specific DFC brake pads, these rotors provide the best possible braking right out of the box compared to anything else in the market! Finally, they apply a genuine GEOMET® Finish throughout the entire part, which promises to deliver superior corrosion protection. The GEOMET® coating is processed dry, shipped dry, and ready to install without any additional preparation. An average brake job takes 1.25-2.5 hours per axle. Without the need to clean an oil covered rotor, this saves a tremendous amount of time and money during the installation process. The GEOMET® Finish is simply and safely swept away by the friction material with no harmful effects. Manufactured for european and heavy vehicles, High Carbon iron formulations (Molybdenum, Chromium, and Carbon) enhances noise dampening characteristics, while providing high strength, and increased thermal conductivity compared to standard discs, which increases durability. Engineered with High Carbon castings to enhance noise dampening characteristics, while providing strength, stability, durability, and performance.
Dynamic Friction Company® is committed to bringing innovation and value to the automotive aftermarket by manufacturing OE-quality brake products. Striving to meet the most diverse customer needs, the company maintains a massive inventory of brake parts for all domestic and foreign vehicle applications from the 1930s to the present. From OE replacement and performance brake rotors to passenger, heavy-duty, and high-performance brake pads to brake calipers and shoes to hardware kits and much more, DFC has everything you need to keep your brake system performing at its best. The company makes all its products from the finest materials using cutting-edge manufacturing technologies to ensure superior durability, strength, and long-lasting performance.