Product Details
Ford F-350 Super Duty 6.7L 2011, Rebel XD Series™ 409 SS DPF-Back Exhaust System with Dual Side Exit by aFe®. Exhaust System Type: DPF-Back. Exhaust Tubing Material: 409 SS. Main Tubing Diameter: 4". Exhaust System Sound: Aggressive / Loud. All systems use factory mounting locations providing stability and hassle-free installation. High quality band clamps are included for a complete 360 degree sealing surface. OE-style bayonet hangers are used to maintain a stable pipe location during high vibration and high heat conditions. The bayonet tip holds the hanger bushing in place for an OE-style fit that does not change with time. This Rebel XD Series exhaust system is constructed of 4" mandrel-bent stainless steel tubing for maximum flow. Smooth transition bends allow for low turbulence, increasing horsepower, torque and lowering EGT’s. Finishing off the exhaust are 5" diameter, Hi-Temp black, stainless steel straight cut tips with intercooling vents designed to reduce exhaust gas temperatures at the tailpipe. A unique stainless steel laser-cut aFe Power logo plate is riveted on for an aggressive style.
Notes
- Some cutting may be required, see instruction sheet for further information
- Remember to check your local or state laws regarding vehicle noise restrictions and Emission Standards
Specifications
Exhaust System Type: DPF-Back |
Exhaust Tubing Material: 409 SS |
Exit Location: Dual Side |
Main Tubing Diameter: 4" |
Exhaust System Sound: Aggressive / Loud |
Tip Quantity: 2 |
Tip Material: 304 SS |
Tip Outlet Diameter: 5" |
Tip Style: Intercooled |
Tip Attachment Style: Clamp-On |
Hardware Included: Yes |
Utilizes Factory Style Flange and Hangers |
Features
- Constructed from 4" mandrel-bent stainless steel tubing
- Uses a high quality band clamp and OE-style bayonet hangers for a secure fitment
- Utilizes all factory mounting locations to provide a quick, hassle-free installation
- Includes massive dual 5" diameter black stainless steel intercooled tips with a laser-cut stainless steel aFe Power badge
A performance exhaust system is one of the most common ways of improving a vehicle's operation. The theory is simple; just reduce restriction to increase exhaust flow and you gain power. But all exhaust systems are not created equal; in reality there's more to it than just selling some sewer pipe sized tubes.
aFe tests its systems on the flow bench and the dynamometer to determine the right pipe size. Then they mandrel bend the pipes to ensure they maintain their shape and size throughout the entire length, to provide smooth, unrestricted airflow. Tubes that are not mandrel bent can lose up to 20% of their diameter in sharp bends. A typical aFe system will increase exhaust flow by up to 29% and lower EGT (Exhaust Gas Temperature) by up to 100º, with a corresponding improvement in power and performance.
![](/images/afe/exhaust-system/info/afe-large-bore-hd-exhaust-systems.jpg)
But performance is only part of the equation. A quality exhaust system should be easy to install and made to last. The muffler and all pipes of the Large Bore HD system are constructed from durable 409 stainless steel. To ensure a tight seal, slotted and swedged ends are used whenever possible. When used with the supplied premium quality band clamps, the tightest, leak-free seal is the result. Every hanger is thoroughly welded on each side to ensure a strong attachment and the hangers also feature swaged bayonet ends to lock in place once installed. The factory mounting locations are used throughout and a 2-piece tailpipe facilitates adjustment.
Every system comes with clamps, hangers and detailed instructions to guide you through the installation. The Large Bore HD Exhaust System is made in USA.
aFe® (Advanced Flow Engineering, Inc.) manufactures performance products for late model cars, light trucks and SUVs. The company was founded in 1999 with an initial concentration on high performance air filters. Since then, the company product line has broadened to include cold air intakes, fluid filters, exhaust systems, intake manifolds, intercoolers, programmers, differential covers, transmission pans and throttle body spacers. The team of engineers, machinists, production and sales people at aFe® have many years of experience in their respective positions, and together work to ensure they produce the best automotive products on the market.