Product Details
Chevy Silverado Chevy Small Block 2001, EZ-EFI 2.0 Fuel and Ignition Multi-Port Fuel Injection Kit by Fast®. FAST™ offers bolt-on XFI 2.0™ Kits to install fully sequential EFI on Small and Big Block Chevy and Small Block Ford engines from mild street rods to 1000 HP all-out race cars.
Specifications
Calibration Module Included: Yes |
Distributor Included: No |
ECM Included: Yes |
EGR: No |
Engine Block Deck Height: Standard Deck |
Fuel Pressure Regulator Included: No |
Fuel Pump Included: No |
Fuel Rails Included: No |
IAC Motor Included: No |
IAT Sensor Included: No |
Injectors Included: No |
Intake Manifold Included: No |
MAP Sensor Included: No |
Oxygen Sensor Included: Yes |
Power Adder Compatible: No |
Self Tuning: Yes |
Throttle Body Included: No |
Timing Control Compatible: Yes |
TPS Sensor Included: No |
Transmission Controller Included: No |
User Tunable: Yes |
Wiring Harness Included: Yes |
Maximum Advertised Horsepower Increase: Up to 1200 HP |
Style: Multi-Port, Speed Density |
Fuel Type: Gasoline |
Quantity: Kit |
Features
- Self tuning EZ-EFI™ gets you up and running quick and EZ; No laptop or tuning knowledge necessary
- EZ-LS™ Ignition Controller offers no tuning quick setup option as well as custom tuning via hand-held
- Hand-held displays up to 20 live-data readings/sensors; various dash display options
- Limited Lifetime Warranty and backed by industry's most extensive tech support team
- Modern, mesh-wrapped wiring harness replaces ugly, complicated stock harness
- 100% designed and engineered in house by FAST™ staff
- Uses OE/stock-style, LS sensors, ignition, and injectors
- Hand-held start-up gauge screen is user selectable
Hand-Held Displayed Data-Readings:
- Target A/F Ratio
- Battery Voltage
- Coolant Temp
- Base Timing
- A/F Ratio
- Air Temp
- TPS %
- MAP
- RPM
- IAC
- Fuel Pump Duty Cycle
- Injector Duty Cycle
- Vacuum Advance
- 02 Correction %
- Idle Advance
- Total Timing
- TPS Voltage
- Fuel PSI
- Lb.Hr.
- Load
Easy LS-Engine Swaps; No Complicated OE-Harness Re-Working or Costly PCM-Tuning
FAST™ engineers have developed the simplest plug-and-play, self tuning engine control system on the market for the LS series of engines. The FAST™ EZ-EFI 2.0™ LS Self Tuning Engine Control Kit is the easiest way to get your LS transplant up and running without the complex PCM flashing and harness reworking required with the stock unit. This kit features all of the advantages of the award-winning EZ-EFI 2.0™ ECU, plus it includes the EZ-LS™ Ignition Controller and uses stock or aftermarket LS injectors, sensors and coil packs.
Advanced Color-Touchscreen Hand-Held Can Replace Tach and Most Gauges
Each FAST™ EZ-EFI 2.0™ system utilizes an easy-to-use interface through the included touch screen hand-held and doesn't require a laptop or tuning experience. After initial setup, the hand-held can be used as a digital dash with the included suction cup window mount. The EZ-EFI 2.0™ system actually tunes itself as the user drives, and because it keeps tuning, future engine upgrades are a breeze, meaning that expensive trips to the shop for simple tune changes are a thing of the past. A purpose-built, OEM-quality wiring harness is included in the kit as well. It features a clean, mesh wrapping that dramatically improves engine aesthetics over the factory harness. And with the included FAST™ EZ-LS™ Ignition Controller, the user can easily get running or has the option to adjust timing. This multi-port installation kit is compatible will all LS-based car and truck engines and is designed and engineered by FAST™. The EZ-EFI 2.0™ LS Self Tuning Engine Control Kit is made in the USA, features a limited lifetime warranty and is backed by the industry's most extensive technical support team. If converting from carburetor, requires fuel system to be purchased separately.
Fast® has been serving the automotive industry for over two decades, specializing in performance fuel injection and ignition parts. Back in 2001 the brand became a member of COMP Performance Group and got the opportunity to conduct more effective R and D efforts with a larger team of experienced engineers. This enabled the company to become what it is today, a well-reputed leader in advanced EFI technology. Offering a full line of EFI systems, intake manifolds, ignition systems, throttle bodies and many other related components, Fast goes to the extreme to allow both racers and performance-minded vehicle owners to experience the latest in fuel injection and ignition technology. No matter whether it is street, race or marine applications, the brand has the right solution to meet your individual needs and requirements. Utilizing only top-grade materials, Fast manufactures products of the highest quality possible.