Vehicle Fitment
| Make | Model | Year |
|---|---|---|
| Ford | F-150 | 2015-2017 |
Product Details
CSX HD2 Series Full Width Black Powder Coated Front Winch HD Bumper with Hoop (X3HD-FD10-FB) by Torxe™. If you’re upgrading your truck’s toughness factor and trail capabilities a definite must have is an off-road front bumper, and you can’t do better than the HD2 Full Width Black Front Winch HD Bumper from Torxe™. With its bold, forceful design, lightweight, heavy-gauge, rust-free aluminum construction, sharply angled ends, integral winch mount, off-road light mounting locations, and optional skid plate, this Torxe™ bumper has the appearance, strength, protection, capability and winch and lighting accommodations you want for your rig. It mounts to your truck’s OE bumper mounting locations, so drilling is not required, and comes with all necessary mounting hardware.
Notes
- Lights sold separately
- Winch sold separately
- Skid Plate sold separately
Specifications
| Bumper Type: Heavy Duty |
| Width: Full Width |
| Hoop Included: Yes |
| D-Ring Mounts: Yes |
| Winch Mount: Yes |
| LED Light Mounts: Yes |
| Material: 5052-H32 Aluminum |
| Finish: Matte Black Powder Coat |
Features
- Rugged, angular design gives your truck an off-road ready look
- Bumper ends angle sharply upward for approach angle clearance and traction
- Pre-drilled winch mount accepts any standard winch with up to 10,000 lb. capacity
- Pre-drilled winch fairlead mount
- Winch and fairlead not included
- Lightweight, heavy-gauge aluminum construction for rust-free strength and durability
- Winch tray, D-Ring mounts and mounting brackets made from carbon steel
- Attractive and damage-resistant matte black powder coat finish
- Removeable, bolt-on hoop boosts appearance and protection
- Hoop includes mounts for 30” double row LED light bar
- LED cube lights can be mounted in recesses in bumper ends
- LED lights sold separately
- Optional skid plate sold separately
- Installs at factory bumper mounting points, no drilling required
- Vehicle specific design ensures easy bolt-on installation
- ACC (Adaptive Cruise Control) system and parking sensor must be relocated on vehicles so equipped
- Backed by a 1-year warranty on finish, limited lifetime warranty on workmanship
Whether you’re outfitting your truck to be an off-road warrior, or you just want it to look the part, there’s no better place to start the transformation than with an off-road bumper. And if dynamic, aggressive looks, high strength and protection, and provisions for a winch and off-road lights are at the top of your required features list, look no further than the Torxe HD2 Full Width Black Front Winch HD Bumper. The Torxe bumper has a chiseled, multifaceted shape that exudes toughness, with a removeable hoop and beveled edges that angle upward at the corners, providing the clearance needed to tackle rough off-road terrain without getting snagged.
Constructed from strong but lightweight and rust-free 5052-H32, 6-gauge aluminum, except for the winch tray, D-Ring shackle mounts and mounting brackets, which are made from carbon steel, this bumper is much stronger than any OE bumper. You get the strength and rigidity needed to ward off rocks and tree limbs out on the trail, and protection against mild impacts while on the road, and the attractive yet durable matte black powder coat finish is tough enough to withstand scuffs and scrapes during off-road excursions and stay looking good. Plus, a skid plate is available as optional equipment.
With this Torxe bumper you’ll have no worries about getting stuck because the included winch and fairlead mounts and D-Ring shackle mounts give you the hook-up capability to pull yourself or a buddy out of trouble. You can mount any standard winch with up to 10,000 lb. capacity. A winch opening cover is provided if no winch or a smaller winch is installed. Bright off-road lights are required gear on any well setup off-roader for safely navigating dark wooded trails and unfamiliar back roads, and with this Torxe bumper you get multiple light mounting locations. You can mount a 30” double row LED light bar on the removeable hoop, and there are recesses at each end of the bumper for mounting LED cube lights. Mesh covers are included to cover the light openings if no cube lights are installed. LED lights are sold separately.
Each Torxe HD2 Full Width Black Front Winch HD Bumper is designed for a specific application, ensuring a complementary appearance and easy, trouble free installation. The bumper mounts at the same locations as your OE bumper, so no drilling or fabrication is required, and all necessary mounting hardware is included. However, if your vehicle is equipped with an ACC (Adaptive Cruise Control) system and parking sensor, these must be relocated when installing the Torxe bumper. A rotatable license plate relocation bracket is included that can be flipped up when fairlead access is needed. The Torxe bumper is backed by a 1-year warranty on the bumper finish, and a limited lifetime warranty on workmanship.
Being a well-respected company in the automotive aftermarket industry, Torxe™ provides products that are globally renowned for their uncompromising quality and dependability. The company has an impressive product line, covering a majority of vehicle applications around the world. Exterior and interior accessories, performance and auto body parts, audio and electronics, and many other high quality products are offered at customer-friendly prices. All Torxe parts and components are engineered to strict quality standards and are inspected and tested to guarantee exceptional performance and long service life.
Related Links
Reviews
(0)Only authorized customers can leave a review on our website. We would love to know what you like or dislike about the product. Share your opinion on product quality, appearance, installation, and other characteristics.
Questions and Answers
(0)If you have any questions about this product, please don't hesitate to ask us. We will be happy to help you!