Dodge Dart Sequential Tail Lights

These lights fit perfectly and were fairly easy to install. Two things would of made the install even easier however: 1) The instructions could of included how to handle wiring the reverse lights in conjunction with these lights. There was no mention of this whatsoever in the wiring diagram or instructions, even though they share the same body grommet and harness so I was left to figure it out on my own. Wasn't too difficult but would of added extra clarity. 2) At first I had a tough time removing the old wires from the body grommet. The instructions say just to remove the old wires and reuse it with the new wires, but my old wires were practically glued in and wouldn't budge. I ended up having to use a heat gun which did the trick. NOTE: I left the reverse light wires as-is and continued using the OEM connector for them (single wire). I then removed the other old wires from the grommet and replaced them with the new wires and then actually used the OEM connector for two of the new wires and only t-spliced in the remaining wires as needed.