EBC Brakes Racing’s dedicated motorsport pad RP-1™ pairs high-performance with unprecedented modulation and control, resulting in a track pad that feels uniquely different to the competition.
Following the hugely successful launch of RP-1™, EBC Brakes Racing increases its motorsport brake pad range with the introduction of latest ultra-high-performance track & race material, RP-X™.
The new ECO copper-free EBC Brakes Yellowstuff compound is a high friction pad right from cold.
Instant brake improvement with just a pad change.
Superb street upgrade pad!
If you simply need a quality OEM replacement pad, look no further than Ultimax.
Track day and light race use on street-based performance cars.
EBC Brakes lowest dust premium street sport brake pad material for cars above 200bhp.
Track and race pads for cars below 250bhp in shorter races.
Want better stopping power and even longer life with Zero noise EBC Brakes Extra Duty pads are the solution!
This set of replacement ceramic brake pads offers OEM quality fit and operation with the superior stopping power, longer life, reduced brake fade, and lower dust buildup that ceramic compounds offer. Pre-chamfered edges ensure more effective braking against worn brake rotors.
These are racing-grade replacement brake pads designed to offer an optimum combination of performance for street use. Aramid fiber compound provides a high level of grip when pads are cold and maintains it without fade even under the hottest operating temperatures. Best suited for higher horsepower cars.
This set of replacement brake pads is engineered for optimum performance on lighter, less powerful vehicles that do not typically travel at triple-digit speeds. Get the fit and lasting quality of original equipment without paying 100% markup that dealers charge for OEM parts. EBC replacement brake pads are blended with fewer metallic compounds to extend brake rotor life by up to 50 percent. Pre-chamfered edges reduce squeal and ensure more effective braking against worn brake rotors.
This set of replacement disc brake pads is engineered with organic compounds in place of metallic ones to give 4x4s better performance in areas where brake components get covered in dirt, sand, and grit. Greenstuff 6000 brake pads provide superior grip without abrasive wear, allowing increased brake rotor life by up to 50 percent. Pre-chamfered edges reduce squealing and ensure more effective braking even against worn rotors.
When you want the longest possible brake life and lowest dust levels for your 4x4, EBC has taken the Greenstuff 6000 organic series brake pads and concentrated the formula to create the 7000 SUV organic series pads which last even longer. Pre-chamfered edges reduce squealing and ensure more effective braking even against worn rotors.
This is a set of replacement brake pads that is designed for heavy-duty racetrack driving where high-performance multi-piston calipers are used. Pads feature two grooves for cooling, vibration-balancing weights on backing plates, triple-strength chemical bonding between pad and backing plate, and a higher friction surface than Yellowstuff race pads. Organic aramid fiber compound provides a high level of grip at extremely low and high operating temperatures. Safe for normal and aggressive street driving.
Get the fit and lasting quality of original equipment without paying 100% markup that dealers charge for OEM parts. EBC replacement brake pads are blended with fewer metallic compounds to extend life of brake rotors by up to 50 percent. Pre-chamfered edges reduce squealing and ensure more effective braking against worn brake rotors.
This is a set of EBC's highest grip brake pads designed for the fastest and longest levels of racetrack driving where racing-grade multi-piston calipers are used. Pads feature two grooves for cooling, vibration-balancing weights on backing plates, triple-strength chemical bonding between pad and backing plate, and specially developed semi-metallic pad material that offers EBC's highest friction level. NOT legal for street use.
If you want better stopping power and even longer life with Zero noise, then the new EBC Extra Duty Light truck, Jeep and SUV brake pads are the best solution.
The RP-1™ racing brake pads are a result of two years of research and testing done by EBC Brakes. It has introduced its race pad material to complete the line-up of performance and track pads. Made with a Carbon Kevlar blend of materials, these brake pads can withstand extreme temperatures and provide the stability rarely seen in performance brakes.
EBC Racings RP-X™ compound is an ultra-high performance track and race pad designed for performance vehicles driven hard on track and for dedicated race cars. RP-X has a very stable friction coefficient of 0.55 mu up to and beyond 850 C, making it an excellent performer for even the most demanding vehicle applications.
The EBC Brakes warranty covers defects in materials or workmanship only. Warranty is for replacement of similar product or refund of purchase value only excluding all labor and ancillary charges such as vehicle towing, fitting, inconvenience, purchasing of other manufacturers products and is good for a period of twelve months from date of purchase or 10,000 miles of highway use. Proof of mileage will be required. Warranty is invalid if product is used for taxi/hire car, racing, rally, drifting, trackday experience driving, or any other form of competition. There is absolutely no warranty on any EBC product for race use. Warranty does not cover brake noise or normal wear and tear. Some brake pad systems cause pads to wear faster than others. Drivers/users must assess the performance and durability of EBC Brakes products themselves if any EBC product is to be used in racing.