2019 Toyota Tacoma Seat Covers

Good fit and material. Shape forms to existing seat fairly good (not excellent). Materials seem OK and gives seat a little extra cushion. I watched the installation video about three times and read the instructions twice. I DO NOT see how you could do a proper installation in 30 minutes, it's impossible to do it right in 30 minutes! I installed the passenger side one afternoon in a couple of hours (maybe longer) and the driver side the next morning longer than that. In order to get all the seat cover straps mounted, connected and pulled tightly (and to not interfere with any of the factory cables and wiring below the seat), I had to completely unbolt the Tacoma seats and tip forward, back and sideways to get all the seat cover straps positioned in an acceptable location. If you don't do it right, the seat cover straps will be pushing against the factory cables & wiring and may drag on the carpet. The front strap should be installed above the seat frame which is a little difficult to install, but can be done. It also would be impossible to reach your hands below the seats to make any strap connections or attachments right. I installed all seat cover straps between the factory wiring and the seat springs and tucked the seat cover straps into the seat springs so they don't hang or drag or get caught in anything. Be prepared to unbolt seats. Note that seat cover back and bottom are supplied as one piece, not individual pieces as instructions indicate. I would assume the 2020 model Tacoma, which now includes power seats, maybe even more difficult to install.