Vehicle Fitment
Make | Model | Year |
---|---|---|
Jeep | Wrangler | 2007-2015 |
Make | Model | Year |
---|---|---|
Jeep | Wrangler | 2007-2015 |
ProGrip™ Front and Rear Brake System (JK44-2X1125-A) by Dynatrac®. The Dynatrac ProGrip™ Brake System comes with larger rotors for the front and rear, providing improved braking by moving the factory calipers farther from the axle centerline. The increased rear braking power provides balanced braking, reducing nose dive and dramatically improving the control of the vehicle in mild and hard braking conditions compared to upgrades that only address the front brakes. Significant research was done to select the optimum front and rear brake-pad linings to balance the system and provide additional stopping power.
Caliper Type: 1-Piston |
Minimum Wheel Diameter Required: 431.8mm (17") |
Driving Style: Daily Driver, Hauling & Towing |
Outside Diameter: Front: 343mm (13.5"), Rear: 362mm (14.25") |
Rotor Material: Cast Iron |
Rotor Style: Plain |
Rotor Type: Front: Vented, Rear: Solid |
Fully instrumented testing showed lower brake pedal pressure and a reduction in stopping distances of up to 30 percent compared to stock brakes on a Jeep JK outfitted with a 4-inch lift and 37-inch-tall tires. Measured G-force during moderate braking (1,000-psi brake fluid pressure) increased from 0.48 Gs with stock brakes to 0.63 Gs with the Dynatrac ProGrip system. Another key advantage is that installation of the system does not require opening the brake hydraulics, thus avoiding the chore of bleeding the brakes after installation. Additionally, brake pedal feel and travel is improved after upgrading to the Dynatrac ProGrip Brake System.
A leader in high performance axle and drivetrain assemblies, Dynatrac® is located in Huntington Beach, California. Founded more than 25 years ago, the company has become a synonym for outstanding quality and expertise. At Dynatrac, they strive to manufacture products that are ahead of their time and meet specific demands of off-road driving. The brand's product list encompasses state-of-the-art hub conversion kits, locking hubs, ball joints, differential covers, and much more. Dynatrac proudly states that everything it offers is engineered, manufactured and assembled in the USA using U.S. materials. Each and every Dynatrac product goes through numerous inspections to ensure unsurpassed quality and long-lasting service life.